Showing posts with label dolby true hd. Show all posts
Showing posts with label dolby true hd. Show all posts

Sony STR-DH800 7.1-Channel Audio Video Receiver (Black) Review

Sony STR-DH800 7.1-Channel Audio Video Receiver (Black)
Average Reviews:

(More customer reviews)
I know just enough about Audio to be dangerous but I'm not a true audiophile (or whatever they're called). So I don't know how an average person would figure this out when it took me an hour and a half on the phone with Sony support before THEY figured it out.
Now this is my second Sony receiver and I purchased this one specifically to go along with my brand new Sony BDP-S360 Blu Ray player. I used brand new HDMI category 2 cables into the receiver and then out to my Sony HDTV. This is suppossed to be the BEST way to get true no-loss sound decoding and picture. Well I was shocked when my receiver was NOT decoding DTS audio. All Dolby Digital tracks were playing in perfect 5.1 surround sound...the DTS tracks played back in Linear PCM stereo. So after I read the manuals, updated the firmware and set everything right then trying a few DVDs and Blu Ray discs I contacted Sony Support via email. Several exchanges later they asked me to call in to better troubleshoot my issue. First I talked to the blu ray guy (since I wasn't sure which device was causing the issue) and after resetting the player and checking all the setting I was transfered to the Audio department. Once again we reset the machine to factory setting, checked all the set ups and still nothing changed (Did I mention that I had to unhook and reconnect several cables and I even had an optical cable running to my old Sony Reciever?). Then 1 1/2 hours into the phone call he asked if I was getting audio through the TV speakers which I was and he said "oh its set to TV + Amp". So we changed that setting to just "Amp" and bingo...DTS surround sound!! I said "but that's the factory default setting". He told me where the info was in the manual but I checked an NOWHERE in the manual does it say that when using the receiver as a passthrough via HDMI inorder to decode a DTS signal the receiver must be set to "Amp" only and not the default setting of "TV + Amp". What the...??
So now the receiver works great even decoding the new DTS-HD Master Audio off my "Watchmen" Blu Ray disc. But be warned that if you use the HDMI inputs to decode your surround sound be sure to change the system to "Amp" instead of the default "TV + Amp" unless you enjoy stereo sound from your suround sound system. This may be the case for other Sony receivers so be aware when buying that factory default setting may not allow for optimum performance and the Sony guys might not be aware of this little fact if you call them.

Click Here to see more reviews about: Sony STR-DH800 7.1-Channel Audio Video Receiver (Black)



Buy NowGet 47% OFF

Click here for more information about Sony STR-DH800 7.1-Channel Audio Video Receiver (Black)

Read More...

Sony STR-DH710 7.1-channel A/V Receiver with 6 HD Inputs Review

Sony STR-DH710 7.1-channel A/V Receiver with 6 HD Inputs
Average Reviews:

(More customer reviews)
I read the two negative reviews with apprehension when I bought this product. However, I took the advice of an amazon supervisor and gave it a shot. HDMI pass through works great on audio and video, even though the instructions in the manual are confusing by showing other configurations. I recommend hooking up all hdmi cables from the quick set-up sheet and ignore other configurations in the manual. Also, I did not perform the speaker callibration.
Set up was more difficult because I use an A/B configuration. My indoor speakers run on A, then I switch off the front indoor and switch on my outdoor speakers using front B. Support from Sony was not the best and I had to call back several times. Tech support associates assumed everything was ready, repeating the company line about automatic detection but that's not entirely accurate. Here's the scoop, Sony sets these receivers up for basic home theater use and specialized options, like A/B, will likely require amp menu changes. Also, older equipment like tv's etc may require changes and/or loss of function like the theater button (which is not a big deal for me because I like to manually choose my sound using sound field on the remote). I just don't understand why A/B isn't turned on automatically at the factory, or why they didn't make A/B turn on automatically if speakers were attached to the B channel, now that would be auto detection!
Here's the deal if you are running A/B configuration you need to use the amp menu button on your remote, select speaker pattern, using up and down in the center controls of remote and choose 3/2.1 plus the middle bullseye for enter. Now SB assign is no longer grayed out and you can turn on B, also under the amp menu speaker option. I read a review on a different Sony receiver that said basically Sony turns off a lot of options, so the user has to manually turn these on and I completely agree with that assessment, plus I would add that Sony does not do a good job of outlining this in the instructions. That's why you shouldn't get frustrated, just call support early and multiple times if you don't feel like you are getting the right answer. Sometimes I had to reference the page of the directions, state clearly the function I wanted to perform and not accept their pat answer which is use the sound field button, or automatic detection. Neither of those things work if you have to turn on/adjust speaker options and/or adjust other devices like tv and dvd player.
Overall, the instructions were very confusing and tech support associates were at times impatient and/or condescending. It has great sound, although sound effects sometimes drown out the center channel speaker. You must use at least the front and center speakers to hear words in movies, plus it automatically turns off your tv volume. It sort of takes control over your tv which is convenient but doesn't allow for any manual overrides. So if you want to use your tv for the center channel, or to boost the sound of the spoken words in a movie, no dice. Before I was using a yamaha and it was manual enough to use the tv for the center channel speaker. Also, the yamaha has just a little better sound quality but I am splitting hairs.
What makes this a better product is that it works/plays better with other devices, no quirks or freezing up, plus remote codes are a snap. There are a lot more bells and whistles but you will probably need to ask support for help with any configuration beyond home theater. Overall, a pretty good product for the price. The positives more than outweigh the negatives.
Hint1: MULTI ST works great for music (basically plays left & right stereo out of all speakers.)
Hint2: Purchase a special cord with a left and right rca output on one end and an mp3 jack on the other, usually sells for $5-10. Hook up the rca cord ends to the front of the receiver and the other goes into where the headphones plug into the mp3 player. Choose video2 on your receiver remote and turn up your mp3 player to full volume, just change the volume from your receiver, not mp3. Now enjoy all your mp3 player's music throughout the house!

Click Here to see more reviews about: Sony STR-DH710 7.1-channel A/V Receiver with 6 HD Inputs

Ignite your home entertainment experience with the STR-DH710 7.1-channel A/V receiver. With six HD inputs (3 HDMI and 3 component), you can take full advantage of all your high-definition components including a Blu-ray Disc player or PS3 system. Everything you hear will sound as close to the master recording as possible with Dolby TrueHD and dts HD decoding technologies. This receiver also features wireless 2nd zone audio capabilities, which allows you transmit wireless audio in up to 10 additional rooms via optional S-AIR accessories. Plus, access all of your HDMI connected devices without having to power on the receiver thanks to standby pass-through.

Buy Now

Click here for more information about Sony STR-DH710 7.1-channel A/V Receiver with 6 HD Inputs

Read More...

Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver Review

Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've had the RX-v465 for over a month now, so i've had plenty of time to get comfortable with the receiver. I purchased this b/c it seemed like the best value. My major goals were to find a receiver that had HDMI vid and audio pass-thru and had good quality cd music output - and the rx-v465 delivered!
PROS:
I used the mic to auto-calibrate the sound quality - very easy (do this before using it). CDs (analog) sound great and digital audio sounds even better. The sound settings are great: it has several sound enhancer settings for a full/modern sound and even a 'direct' mode where the receiver uses the minimum electronics to provide a pure (almost vinyl) sound. These settings are easy to access once you get comfortable with the remote.
It has plenty of inputs for all of your older (rca) and newer (HDMI) devices. For TV, I run my comcast dvr box via an hdmi cable to the receiver, then run an hdmi from the receiver to the tv. For dvd, i run hdmi to the receiver. Only one cable (an hdmi) is needed from the receiver to the TV (sony bravia 52v5100). Video quality and dolby digital audio quality is excellent. It even allows you to view TV without turning on the receiver (downside in this mode is you can't listen to the sound system). Also, my cable remote can control the receiver volume when watching tv when the pass-thru mode is set (control-on).
CONS:
1. There is an annoying time delay (up to 3 seconds) when switching from HD to non-HD channels and when pulling up the dvr menu/list and cable guide. The receiver is thinking /switching digital modes and makes clicking sounds as it switches resulting in sound but no vid. This issue took me some time to get used to and will be a deal-breaker for most people.
2. Longer delay / thinking when the receiver is turned on and the hdmi input is set. Same clicking and no vid as it finds the right mode for the data that is coming in.
3. Remote is annoying, not built well, but whatever, its not a deal breaker.
OVERALL, i'm happy with this receiver at the price i paid when compared to other available receivers with similar features/functions.


Click Here to see more reviews about: Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver

Yamaha HTR-6240BL 525 Watt 5-Channel Home Theater Receiver

Buy Now

Click here for more information about Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver

Read More...

Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver Review

Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver
Average Reviews:

(More customer reviews)
Introduction:
So, I finally found myself in a position to upgrade my home audio. For many years I used and rather enjoyed my 5 dic DVD changing home theater in a box (Sony DAV-HDX500/i BRAVIA Home Theater System) but still didn't feel like I was getting the full audio experience out of my movies and music. Since I recently purchased a new 3D TV Samsung UN55C7000 55-Inch 1080p 240 Hz 3D LED HDTV (Black) and I already had a PlayStation 3 160 GB I figured my best option was to find an A/V receiver that would make the most of the 3D Blu-Ray functionality of the PS3 and the Samsung UN55C7000. After much research, and slowly piecing together a 7.1 collection of quality speakers, I decided to take a gamble and purchase the Sony STR-DN1010.
Initial Setup:
When the STR-DN1010 arrived via UPS I was excited. Upon unboxing, I immediately noticed the sleek and contemporary design and was pleased that it went so well with the decor in the family room. Having already run the speaker wires all I needed to do was; connect the wires to the appropriate receiver ports; connect the PS3, DVR/cable box, and TV; and plug the receiver's power in.
I open the user manual and it takes you through the usual inital setup steps I previously accomplished, so I flip to the speaker calibration section. Included in the box is a Auto-Calibration microphone which works surprisingly well. All I needed to do was plug it into the front of the receiver and follow the steps in the manual. This is where it gets a little complicated. I wanted to manually adjust my speaker but was having trouble navigating the on-screen GUI (graphical user interface). Response from the GUI had slight latency issues (as in it wasn't a 1:1 response from the remote commands). The manual seems to be made for above average tech consumer but I managed to figured most of it out and everything worked flawlessly.
Audio and Video Performance:
After everything was tweaked to my liking I first tested the audio performance from the cable box. Sound was great for the most part but after cycling through the numerous sound modes I noticed that in Sports mode audio sounds like someone speaking into a plastic tube, this was a minor complaint. Sports in general look and sound phenominal.
Next I tested Blu-Ray performance via the PS3. I checked the audio quality using The Matrix Blu-Ray on the scene where Neo and Trinity break into the building where the agents have Morpheus held captive. From the booming shotgun fire to the loud thud of guards getting kicked to the high twinkling of expended shells hitting the floor, I was in awe of the clarity of sound not to mention the crisp quality of video. Next I checked out the 3D video quality of Despicable Me 3D. Absolute perfection I couldnt find a thing to complain about here.
Since I had a Sony TDM-IP1 Digital Media Port iPod Dock from my previous home theater in a box I connected it to the receiver and plopped my ipod onto it to test my digital audio collection. Since I like The Roots (hip hop band) and they use live instrumentation in most of their music, I decided to use the album "How I Got Over" as my test material. Bass guitars sounded smooth and organic, percussion was precise and thumping, and vocal sounded live. Basically it all sounded like I was right in the studio with the artists. Great reproduction from the receiver, once again no real complaints here.
Conclusion:
In closing, this A/V receiever was everything I was looking for. I purchased an open box item here on Amazon so I only paid a little over $300 USD for it with free super saver shipping. Considering the price and performance I got this receiver, I feel like I got a hell of a deal. As far as gripes and complaints they're minor. The plastic speaker terminals used to connect the speaker wires to the receiver are a little cheap but sturdy enough to get the job done. I suggest you buy banana plugs to offset this. Another drawback is the lack of HDMI inputs this receiver has compared to comparable receivers of other brands (this has 4 in and 1 out, most others have 6 HDMI inputs). And lastly, not so much a problem for me but if you dont have a Sony Ipod dock you have to shell out roughly another $100 just to get on screen control of your Ipod through the receiver. Of course, you could always just use a 3.5mm audio cable to connect your ipod/mp3 player but you miss out on the on screen control. The manual requires a Rosetta Stone to decipher it, nuff said. I hope this review was helpful and if it was please vote up for me. Thank you for taking the time to read this.7.1 Home Theater Speakers:
-Sony SS-CN5000 Dual 5.25" Center Channel Speaker (each, black)
-Sony SSF-7000 Floor-Standing 4-way Speaker with 8" Woofer (Pair)
-Sony SS-B3000 Bookshelf Speakers with 8-Inch Woofer (Pair, Black)
-Sony SS-B1000 5 1/8-Inch Bookshelf Speakers (Pair)
-Sony SA-W2500 Performance Line 100 Watt SubwooferBy the way, check out the images above to get an idea of the STR-DN1010's scale

Click Here to see more reviews about: Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver

Take your high-definition surround sound experience to the next level with the STR-DN1010 7.1-channel Blu-ray Disc A/V receiver. Enjoy 3D images while hearing sound closer to the way it was captured, plus improve image quality of non-HD video sources to HD using one convenient cable. Offering plenty of connectivity options for your expanding lifestyle, this A/V receiver features 4 HDMI inputs, 3 component inputs and is SIRIUS Satellite Radio-ready. You can also share your music in multiple rooms with wireless 2nd zone technology.

Buy Now

Click here for more information about Sony STR-DN1010 7.1-Channel A/V Blu-Ray Receiver

Read More...

Sony STR-DE897 Audio / Video Receiver, Black Review

Sony STR-DE897 Audio / Video Receiver, Black
Average Reviews:

(More customer reviews)
I recently replaced my JVC surround receiver with this one. I love it, now I have all the inputs I need for VCR, DVD, Sattelite, Etc.. It also lets me connect composit video devices and send them to my monitor through the s-video jack. With my JVC receiver I could never get a good balance between my surround speakers and my center and front speakers. With the new receiver it sounds great. The only problem is now I'm tempted to add side surrounds to get 7.1 surround.

Click Here to see more reviews about: Sony STR-DE897 Audio / Video Receiver, Black



Buy Now

Click here for more information about Sony STR-DE897 Audio / Video Receiver, Black

Read More...