Showing posts with label yamaha receiver. Show all posts
Showing posts with label yamaha receiver. Show all posts

Yamaha RX-V765BL 665 Watt 7-Channel Home Theater Receiver Review

Yamaha RX-V765BL 665 Watt 7-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I had been looking at several of the Yamaha models through the spring of 2009, as well as its competitor's (Sony, Onkyo, Denon), for an upgrade of my ancient Sony receiver (one of the first Pro-logic receivers). I just installed a set of Definitive Technology Mythos speakers ordered through Amazon.com, including a power-hungry Mythos Three center channel. I wanted this receiver to be the core of my Home Theater as it's primarily use for improving my Sony Blu-ray and TiVo Series3 HD DVR experience.
Sports, such a baseball is vivid with the upscale feature from 1080i to 1080p (although it has not yet improved the performance of my Seattle Mariners). 1080i broadcast shows such as Chuck, both sound and look great.
The optional YDS-11SL iPod dock works well with both a 4th generation Nano and an 80G iPod Classic, including the videos.
What is worth the wait is the clean layout on the back, the heft of the discrete amp, and the Blu-ray friendly support with both the scene button and the Decoders for HD audio formats: Dolby TrueHD and DTS-HD Master Audio. Yes they do make a difference in your home theater experience.
The audio calibration microphone works as advertised. Silent Cinema (headphone mode) is also a nice feature.
What could be improved - You need to keep the manual next to you for the first week to figure out some of the controls such as accessing all of the iPod controls with the dock. I was also sorry to see HD Radio(tm) missing from this "top of the mid-range" Yamaha's. The older RX-V863 has it, but this one doesn't. Also the four scene buttons are not programmable. I wanted to program the TV scene button for my TiVo (HDMI #2), no luck.
In the end, if you are looking for a quality receiver that performs well on both movies and music, and can drive your amp hungry speakers to their potential, look no farther that this RX-V765. It really was worth the wait.

Click Here to see more reviews about: Yamaha RX-V765BL 665 Watt 7-Channel Home Theater Receiver

Yamaha RX-V765BL 665 Watt 7-Channel Home Theater Receiver

Buy NowGet 38% OFF

Click here for more information about Yamaha RX-V765BL 665 Watt 7-Channel Home Theater Receiver

Read More...

Yamaha RX-V367BL 5.1 Channel 500 Watt AV Receiver (Each, Black) Review

Yamaha RX-V367BL 5.1 Channel 500 Watt AV Receiver (Each, Black)
Average Reviews:

(More customer reviews)
We had a very old audio only receiver and were looking to replace it (almost 10 year old technics). We picked up the Yamaha RX-V367, even though there were no reviews, since the receiver was just released, and it was in our price range (200 to 300). So far we are happy with the new receiver; it is connected to the satellite box, xbox, and blu ray.
Speaker set up: Set of Polk Rti8 (left right and center), and klipsch Klipsch Synergy Series SS.5 rear surround (left and right). The sound coming from the speakers was MUCH better than from our ancient receiver.
Not a fan of the Sound Field Programs, seems too much like a gimmick, and only adds an echo depending on what setting (one setting might effect the vocals more, or another setting might effect the music), but I imagine some people would enjoy that. Has many audio processing options, works great with Netflix streaming, set it to 5ch stereo and it will work great; can clearly listen to what's playing (netflix only streams in 2ch stereo). Mainly use the "Straight" audio processing setting (for xbox and blu ray), I assume the receiver doesn't add any extra "audio goo", and plays direct from the source.
Good video quality, no noticeable video deterioration. Yamaha says it's compatible with HDMI 1.4 and will support 3D (with a firmware upgrade). Not that interested in 3d TVs anyways.
Clear and easy to use menu system (compared to my old technics receiver), competent directions, fairly user friendly.
Has 4 HDMI inputs which was much better than many of the competitors in the same price range. We didn't test the FM/AM tuner, and only connected HDMI and RCA from computer. We were also swayed by the extra bluetooth adapter so we can listen to music (and hopefully stream Hulu audio) wirelessly from the computer (and get rid of the airport express). Will update review after getting bluetooth.

Click Here to see more reviews about: Yamaha RX-V367BL 5.1 Channel 500 Watt AV Receiver (Each, Black)

The Yamaha RX-V367BL 5.1-Channel AV Receiver is a great value-priced receiver to help take your home theater experience further. It features the latest HDMI specifications (4 inputs/1 output) with 3D-readiness (with firmware upgrade), 1080p HDMI repeating, and renowned Yamaha technologies like SCENE and CINEMA DSP. Expand your options even further with optional docks (sold separately) to add your iPod, iPhone, or Bluetooth sources.

Buy NowGet 26% OFF

Click here for more information about Yamaha RX-V367BL 5.1 Channel 500 Watt AV Receiver (Each, Black)

Read More...

Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver Review

Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've had this receiver & its ipod dock for about 45 days. Picked this one over the 663 for its video upscaling. I use it mainly for watching dvds and ipod videos, streaming netflix, and listening to ipod and HD radio music.
Pros: Quality of sound and video output met my high expectations. (I'm biased toward Yamaha already FWIW). Surround fields are versatile & distinct. The enhancer modes are fantastic for low volume listening. Headphone listening is stellar. Config menus are straightforward. YPAO was easy to set up, though I wound up tweaking rear speaker adjustments up a bit as personal preference. The remote runs all our gear. I dusted off old concert and movie DVDs and this receiver makes them seem new again.
Cons: No macro mode on the remote to power everything on & off with one button. HD radio control is not intuitive. So far I haven't figured out if I can navigate a docked ipod's menus with my TV osd which would be nice.
Bottom line: I saved up and looked at a LOT of receivers before choosing this one, and I'm not disappointed at all. The RX-V863 is everything advertised and lives up to Yammy's top shelf reputation.

Click Here to see more reviews about: Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver

The Yamaha RX-V863BL 7.2-channel digital home theater receiver delivers 735W powerful surround sound over 7 speakers (105W x 7).Full support for HD audio formats ensures maximum enjoyment of all high definition sources. Other advantages include full HD 1080p video upscaling with 3 HDMI inputs, an HD Radio tuner, as well as exclusive Yamaha features such as Pure Direct for the highest possible signal purity, YPAO sound optimization and 4 SCENE buttons for quick and easy browsing, selection, and automated setup of audio sources.

Buy NowGet 33% OFF

Click here for more information about Yamaha RX-V863BL 735 Watt 7.1-Channel Home Theater Receiver

Read More...

Yamaha HTR-5660 6-Channel Digital Home Theater Receiver Review

Yamaha HTR-5660 6-Channel Digital Home Theater Receiver
Average Reviews:

(More customer reviews)
I'm not a hardcore audiophile, but I did a fair amount of research before buying this receiver. I found this unit has all of the features I was looking for, and at an exceptional price.
This receiver is basically the new version of the 5560. It adds 10 watts per channel for 85 watts each. It also now has digital audio inputs and s-video inputs for every video input including the front one. This receiver is also basically identical to the RX-V640 that Yamaha sells through it's retail channels. According the Yamaha website, the only difference is the coloring of the lettering on the front of the receiver.
There was a list of features I was looking for in a receiver and this met all my criteria. Support for both 6.1 channel Dolby Digital and DTS were a must. For my particular application 7.1 channel surround was overkill, and there currently aren't that many sources for it. Discrete circuitry for each speaker is a must. No spring clips for speaker connections. All support banana clips. I use a DVR and a VCR, so I wanted 2 AV in/out hookups. I have an oddly shaped room with less than optimal speaker placement, so I wanted the ability to adjust each speaker volume level independently. I don't have a HDTV compatible TV yet, but I wanted composite video support for when I get one. This receiver has 2 composite inputs and 1 output. Size was also a consideration for me as the receiver would have to fit into an entertainment center. The Onkyo I was looking at had similar features, but was just too massive to fit. The Yamaha was a more reasonable size.
Performance wise, I have been very impressed with the Yamaha. With the ability to adjust each speaker volume level independently, I was able to set it up to create impressive surround effects despite my less than optimal room. The Dolby Digital and DTS effects are impressive. When the receiver detects a DD or DTS source, it switches to those modes automatically. There are 40+ additional surround modes. Yamaha apparently went to a lot of trouble to develop them, but in my opinion they are mostly useless. I've settled on Dolby Surround II for most of my non-Dolby Digital AV viewing which is very impressive so far. 6 channel stereo is great for listening to music and really allows you to take advantage of your surround system. I've tried most of the other surround modes. Some are interesting, but I haven't found that I use them much. The included antennas for AM and FM reception are adequate and I found that my reception was much improved over my last receiver (Sony).
I found the remote and manual to be adequate and simple to use. I was able to adjust most of the settings on the receiver with minimal hassle. I was able to map all of the remote features to my Sony learning remote and it works fine.
If you are looking for a step above entry level receiver with many of the features and quality of the high end models, I highly recommend this model. I did a search on the internet and found many stores offering it at very attractive prices. I called J&R and they matched the lowest internet price and I had the receiver in 2 days. They also have a very reasonable return policy though I haven't had to test it yet.

Click Here to see more reviews about: Yamaha HTR-5660 6-Channel Digital Home Theater Receiver

Packed with connections and proprietary audio-enhancing technologies, Yamaha's HTR-5660 is your gateway to home-theater bliss. The receiver can power two rooms at once (one in surround sound, the other in stereo), and it offers the convenience of DVD-Audio/multichannel SACD-ready six-channel analog inputs alongside the latest 6.1-channel surround processing and premium Yamaha features.When hooked up with the digital-audio output from a DVD-Video player or digital satellite receiver, the 85 watts-per-channel HTR-5660 (105 wpc peak) handles 5.1-channel surround decoding for both major formats, Dolby Digital and DTS. In addition, the HTR-5660 also processes Dolby Digital EX and DTS-ES, which create an even more expansive soundfield through the use of a center-rear surround channel, totaling six discrete full-range channels in addition to the LFE (low-frequency effects) channel: left, center, right, and left, center, and right surround. Want even higher power? The receiver offers 6.1-channel preamp outputs for direct hookup with a six-channel power amplifier.Exclusive Yamaha technologies include Quad-Field Cinema DSP (based on a wealth of measured data in real studios and halls, this processing is designed to highlight the full potential of movie sound mixes), Silent Cinema (which simulates 5.1-channel listening through a pair of ordinary stereo headphones, not included), and the company's YSS-938 32-bit DSP chip providing 25 unique surround algorithms with 44 variations to help you perfectly match your simulated acoustic space to your video program.Non-Dolby Digital and DTS sources can benefit from surround processing, too--with enhanced directional steering over standard four-channel Dolby Pro Logic, Dolby Pro Logic II provides five channels of surround processing from any stereo source--whether that's a TV broadcast, VHS tapes, or your favorite CDs, cassettes, and LPs. Pro Logic II delivers full-bandwidth stereo surround channels with 40 dB of left-right separation.And, when you're listening to multichannel presentations late at night, you'll appreciate Silent Cinema, which simulates 5.1-channel listening through a pair of ordinary stereo headphones (not included). Silent Cinema uses unique parameters for each soundfield to ensure accurate headphone representations of each soundfield.Then there's the six-channel DVD-Audio/SACD-ready inputs mentioned above. If these formats are so high-tech, you might wonder, why do you need analog inputs to appreciate them? Because, for reasons of content protection, DVD-Audio and SACD players perform their own digital-to-analog conversion, passing high-resolution analog, rather than digital, signals on to your amplifier. (And analog, after all, is what your amp feeds your speakers.)The versatile unit offers 12 video input connections (with five S-video inputs and two high-resolution component-video inputs), five fixed and assignable digital-audio inputs (great for DVD, DSS, CD, laserdisc, gaming consoles, or minidisc), and front-panel input connections for your camcorder or other spontaneous hookup (including S-video and an optical digital-audio in). The HTR-5660 comes with a preset remote control.Last, but certainly not least, the HTR-5660 benefits from Yamaha's Digital ToP-ART (Total Purity Audio Reproduction Technology) build philosophy. ToP-ART's goal is to maximize digital quality while minimizing analog circuitry. The culmination of the best digital engineering and design possible, it brings together several key elements to create the best-sounding, easiest-to-use A/V components available.What's in the Box Receiver, remote control, remote batteries, FM wire antenna, AM loop antenna, a user's manual, warranty information, and registration information.

Buy Now

Click here for more information about Yamaha HTR-5660 6-Channel Digital Home Theater Receiver

Read More...

Yamaha HTR-5550 Audio/Video Receiver Review

Yamaha HTR-5550 Audio/Video Receiver
Average Reviews:

(More customer reviews)
.... I too have had problems with my Sony receivers, Sony makes great TVs, computers, etc., but stay away from their non-ES audio products.
The HTR-5550 has a high current amplifier (high current amplifiers will play louder and sound better than non high current amplifiers of the same or higher power rating). The quality of the product is excellent, no loose knobs, cheep buttons, etc. Yamaha's DSP processors are second to none.
Component video switching works well and has enough bandwidth for HDTV signals. The remote is logical, as is the receiver for the most part except for the radio presets, it's a little tedious to use, but at least it can scan and automatically program in radio stations. It also has assignable inputs.
The sound quality is outstanding, good definition, no signal clipping.
There is a lot more to it, but it is really best to just try it. Reviews help, but you need to actually use it to fully understand the overall quality of the product. I compared to Marantz, Harman/Kardon, Onkyo, Denon, and you definitely get more for less with the Yamaha. If you are in the market for a receiver in this price range, I highly recommend the HTR-5550. Also if you are looking at the $200-300 receivers, trust me it is much better to spend more to get this. I have tried the cheep receivers and you get what you pay for.

Click Here to see more reviews about: Yamaha HTR-5550 Audio/Video Receiver



Buy Now

Click here for more information about Yamaha HTR-5550 Audio/Video Receiver

Read More...

Yamaha RX-V1065BL 7.2-Channel Digital Home Theater Receiver (Black) Review

Yamaha RX-V1065BL 7.2-Channel Digital Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I needed to replace a couple of old receivers so I found a great deal on the RX-V1065 and RX-V765 on Amazon. I ended up getting both of them for aboout what 2 V665's would have cost me a a Big Box store. I first setup my Main Theate Room with the 1065, I thought it was somewhat difficult to get everything the way I wanted it but the automatic speaker setup was slick and the sound is fantastic compared to my old Sony I had previously. The Menu system takes some getting use to but once you do it's not bad to navigate. All in all I was pretty darn happy with my purchase, My JBL's sounded much better then before and although I didn't really notice any difference in video quality, it was as good as before and now I had everything coming thru the same box. Surround sound was a huge step up from my old receiver also, you are almost looking behind you now because you'd swear someone is behind you, where on my old Sony it was more or less a quieter front speaker.
I then went to hook up my 765 in my cave TV room, first thing that I noticed was that is basically identical to the 1065, sure the menu system is not as polished but as far as the functionality that I need it is the same. I have a few year old Bose surround sound in this room with a JBL center chanel speaker and what a HUGE difference this receiver made over my old Onkyo, the Onkyo was really good for music but surround sound was sub par, but it was 10 years old I guess. Granted I'm only hooking up a Xbox 360, blue ray and TV in this room but watching Vikes beat up the the Packers in surround sound with this receiver was great, I haven't figured out which sound field I like best but there are a couple perfect for sports.
One of the coolest things was when I grabbed the TV remote from my Samsung LCD by mistake to turn the volume down and it says RX-V765 un the upper corner and starts to tun down the volume of the receiver from the TV, displaying the volume the whole time it's changing. I guess that Anynet capability on the Samsung TV's with a HDMI reciever gives you a few more bells and whistles. Also really cool is when I turn on the Xbox or turn off the TV the receiver will come on or off accordingly. I haven't setup the remote for additionaly devices yet, but it seems to be easy to use and is exactly the same for the 765 and 1065, I actually expected the remote to be better for the 1065 so i was a little disapointed when I saw it, but in using it it seems OK/
One thing I do not like is the Zone 2 ability on the 1065, I almost wish is was more or less a A/B speaker selector, I have a normal 5 speaker surround setup, in addition to that I have 2 speakers in the kitchen, right behind the TV room which are connect to Zone 2 that when I'm listening to music we like to have on so that you have more sound. The problem is that Zone 2 running the same input as the Main Room is off by a few fractions of a second and if you stand right between the 2 rooms, it sounds like the song is a half a second behind in the kitchen, I tried the lipsync thing, which only made it worse, I haven't given up on it yet, but it's not obvious how to fix this.
Bottom Line -
Both the 1065 and the 765 have more inputs than I know what to do with.
Neither have HDMI on the front, I didn't want it anyway, as I think it looks stupid to set all your equipment up and then have a big cable hanging off the front of your system anyway. That's why the put the jacks on the back, right???
May not have quite as many sound fields as some others out there, but I pick the 2 or 3 I like for movies, sports and music anyway and don't care about the rest.
The YPAO is cool and works great to setup the speakers.
The onscreen Menu is better on the 1065 but adequate on the 765.
HI-DEF Radio sounds amazing on both.
Don't think I will ever use the remotes as universal remotes, but they are adequate for running the receivers.
I cannot comment much on the video conversion, as everything I am running is HDMI and looks the same as it die running straight into the TV.
Sound on both of these is fantastic, even at volumes that start to hurt, the sound is clear, the bass is crisp not slow and there is no distortion, my old receivers would make my speakers start to hiss at a much lower volume, and these receivers never do.
Save yourself some money though get the 765, once it's all setup and you don't need to go into the menu anymore, you'll never notice the difference.
I read a lot of reviews and narrowed it down to Onkyo and Yamaha, at last second I pulled the trigger on Yamaha and for what I paid on Amazon for the 2 of them I am thrilled with my purchase

Click Here to see more reviews about: Yamaha RX-V1065BL 7.2-Channel Digital Home Theater Receiver (Black)

Yamaha RX-V1065BL 7.2-Channel Digital Home Theater Receiver

Buy NowGet 35% OFF

Click here for more information about Yamaha RX-V1065BL 7.2-Channel Digital Home Theater Receiver (Black)

Read More...

Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver Review

Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've had the RX-v465 for over a month now, so i've had plenty of time to get comfortable with the receiver. I purchased this b/c it seemed like the best value. My major goals were to find a receiver that had HDMI vid and audio pass-thru and had good quality cd music output - and the rx-v465 delivered!
PROS:
I used the mic to auto-calibrate the sound quality - very easy (do this before using it). CDs (analog) sound great and digital audio sounds even better. The sound settings are great: it has several sound enhancer settings for a full/modern sound and even a 'direct' mode where the receiver uses the minimum electronics to provide a pure (almost vinyl) sound. These settings are easy to access once you get comfortable with the remote.
It has plenty of inputs for all of your older (rca) and newer (HDMI) devices. For TV, I run my comcast dvr box via an hdmi cable to the receiver, then run an hdmi from the receiver to the tv. For dvd, i run hdmi to the receiver. Only one cable (an hdmi) is needed from the receiver to the TV (sony bravia 52v5100). Video quality and dolby digital audio quality is excellent. It even allows you to view TV without turning on the receiver (downside in this mode is you can't listen to the sound system). Also, my cable remote can control the receiver volume when watching tv when the pass-thru mode is set (control-on).
CONS:
1. There is an annoying time delay (up to 3 seconds) when switching from HD to non-HD channels and when pulling up the dvr menu/list and cable guide. The receiver is thinking /switching digital modes and makes clicking sounds as it switches resulting in sound but no vid. This issue took me some time to get used to and will be a deal-breaker for most people.
2. Longer delay / thinking when the receiver is turned on and the hdmi input is set. Same clicking and no vid as it finds the right mode for the data that is coming in.
3. Remote is annoying, not built well, but whatever, its not a deal breaker.
OVERALL, i'm happy with this receiver at the price i paid when compared to other available receivers with similar features/functions.


Click Here to see more reviews about: Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver

Yamaha HTR-6240BL 525 Watt 5-Channel Home Theater Receiver

Buy Now

Click here for more information about Yamaha HTR-6240BL 525-Watt 5-Channel Home Theater Receiver

Read More...

Yamaha RX-797 Audio/Video Receiver Review

Yamaha RX-797 Audio/Video Receiver
Average Reviews:

(More customer reviews)
This is an excellent 2-channel Stereo Receiver, for several reasons. Let me explain why I chose this brand/model over others and how I came to it. If you are in the market for Stereo Receiver, it may be useful for you.
A few months ago, I was listening to a jazz CD on my cheap ($200) Sony Home-Theater-In-A-Box and noticed that the sound was noticeably tighter than when I listened to it on my much more expensive, but significantly older stereo system. My old stereo system was purchased as separate components in 1993. It consisted of Sony STR-D990 Receiver ($400), single-disc Sony CDP-211 CD player ($100) and pair of Advent Baby II speakers ($250). Mind you, each of these components work and sound as good today as they did 15 years ago at the time of purchase (kudos to Sony for that), but I suppose I'm getting a little pickier now that I'm in my 30s. Music plays a MUCH larger role in my life than movies or television does (hence the cheap Home Theater set-up), so I decided I needed to upgrade.
PRIORITIES: 1) SPEAKERS--> 2) RECEIVER--> 3) CD PLAYER --> 4) CABLING/INTERCONNECTS
I decided that speakers were most important and thus the place to begin. After reading several reviews, I decided that Polk Audio Rti6s might be a good choice. I went to a retail store to listen to them and they sounded really good, but then the sales associate let me listen to the Polk Audio Lsi9s. Whew! They just blew me away. I had never heard anything like them. While the Rti6s run for $270, the Lsi9s are $900, but well worth it for that price, as a long-term investment (Polks come with a 5-year warranty). But I noticed that these run at 4 ohms and need a low-impedance amplifier/receiver, that is, one equipped with so-called "high current amplification," to drive them. Well, my old Sony did not have this function (it could take only 8-0hm current speakers). So, I looked all around for a receiver that could fit the bill and the Yamaha RX line became the obvious choice, after reading positive review after positive review. Since the Lsi9s can handle 200 watts per channel, I chose the RX-797 because while it has a power rating of 100 watts per channel at 8 ohms, it allows one to use two 4-ohm speakers and when doing so there is a power boost. Customer representatives from various retailers couldn't give me an exact watt rating (because Yamaha does not conduct tests at with 4-ohm speakers), but the general concensus was that it would increase to about 140 watts per channel with 4-ohm speakers. (I just didn't want to shortchange my speakers). I also chose this receiver because of the extremely low Total Harmonic Distortion (THD) rating of .019% as well as the Pure Direct and CD Direct modes for the lowest possible distortion. (Compare these features to say Onxyo and Harmon Kardon A/V receivers in this range and you'll see that the advantage lay with Yamaha).
When the RX-797 arrived, it not only lived up to but exceeded my expectations. Paired with the Lsi9s, I can hear a much, much crisper separation of instruments, and this is especially nice for my digitally remastered jazz CDs. I live in an apartment complex now and never have the need to turn the volume beyond the 9 o'clock position. I have gone up to 11 o'clock for testing (when I knew my neighbors weren't in!) and, as expected with these ratings, I couldn't hear any distortion whatsoever. (I can't wait until I move into a house for a larger sound stage). Other pluses: The knobs and controls have a nice solid feel and look great. It picks up many more FM radio stations than my old receiver, and the reception is noticeably cleaner. The remote is simple and sensible (just how a remote should be). My only gripe is that one cannot program CD players made by other manufacturers with this remote, but perhaps thats standard practice. This has other nice features such as being XM Satellite Radio Ready and dual room/dual source for those who are interested, but the main selling points for me were the 4-ohm capability, the wattage rating and the extremely low distortion. The fine looks and sensible controls/display and remote are icing on the cake.
I found one from an authorized dealer by a fluke for $350, but certainly would have been willing to pay the full $499. If you see one for less than $450, be sure to first confirm with the seller (or better yet Yamaha) that they are indeed an authorized dealer; otherwise your two-year warranty won't be honored if you run into problems (not that I'm expecting to).
In sum, if you are looking for a receiver with ample, clean power, extremely low distortion, the abilitiy to drive 4-, 6- or 8-ohm loads, excellent FM reception, and easy to use and well laid-out functions for 2 channel (as opposed to Home Theater) listening, I don't believe you can do better for under $600 than Yamaha's RX-797 receiver.

Click Here to see more reviews about: Yamaha RX-797 Audio/Video Receiver



Buy NowGet 9% OFF

Click here for more information about Yamaha RX-797 Audio/Video Receiver

Read More...

Yamaha HTR-5063BL 7.1 Channel 630 Watt AV Receiver (Each, Black) Review

Yamaha HTR-5063BL 7.1 Channel 630 Watt AV Receiver (Each, Black)
Average Reviews:

(More customer reviews)
I have owned multiple Yamaha AVR's in the past and this one replaces one of them. This is the first time I've actually used an AVR for switching video. I previously ran all video inputs directly to the TV until now. Since most of my gear is HDMI capable I figured it was time to simplify things and run a single output to the TV and I'm glad I did.
SYSTEM
I wouldn't say I have a complex system but it's probably more complex than most. My system includes a PS3, Wii, XBox 360, Yamaha AVR, HD DVR from direcTV, Mitusbishi 73" DLP, and a Mitsubishi 3D converter. One reason I chose this AVR is it's 3D capable.
SETUP
Setup took awhile (several hours) since I had to configure not only the AVR but re-configure the other gear and the Harmony remote as well. I did find one bad input on component 1 but chose to move to a different input instead of returning it. I don't plan on using component if possible and have eliminated component so far. Well, at least until I get a component cable for the Wii. I had to configure and test 3D as well which added to the time.
The AVR comes with a mic for auto-calibrating the speaker levels which I used successfully. I also renamed all the inputs so the AVR reflects my component names when in use. There's a nice feature that allows me to set a specific volume level whenever I activate the AVR. I set the composite input (Wii) to upconvert to 720p to HDMI output but honestly I'm not happy with the results hence the need to change the Wii to component. Although I'm not using it, the AVR has the capability of selecting any audio input for matching with a component input so you aren't stuck using optical when you need or want RCA or something other.
Setting up the Harmony One remote was a bit of a challenge, although not due to the AVR. In fact the AVR was the easiest part to program on the thing. The receiver model was already part of the Harmony choices and works perfectly. Getting 3D configured was a bit more challenging but I got it going. I verified on the Yamaha web site that the AVR serial number was already HDMI 1.4 compliant and needed no firmware upgrade and indeed I was able to switch 3D from direcTV through the AVR to my Mitsu TV just fine.
PERFORMANCE
I am very happy with the choice, the performance and the setup options of this AVR. I'm not using all surround options (only 5.1) though. I'm giving 4 stars instead of 5 stars because of the bad component jack, and the inability of switching component input to the single HDMI output. Otherwise, it's a solid AVR that has drastically simplified my HDMI switching and given me 3D in the process. Good job Yamaha.
Big Red12/1/10 UPDATE!
After using this AVR for awhile I thought I needed to come back and update this review. I still like it and would still recommend it but there is one little pain I should relay.
During Directv program changes (stop watching DVR program, start watching another) I get a blue screen quite often. A blue screen from the TV's pov means no signal. However, to be fair I don't know if this is the fault of the receiver or the TV since both are new. The pain, the program will be playing while I can't see it, it takes a few seconds to sync up. The way I deal with it is to simply pause the program until the picture is onscreen.
The firmware is upgradeable on the AVR so hopefully they will fix this issue if indeed it is the AVR causing it.
Big Red
1/18/11 UPDATE!
This is a critical update since it affects the functionality of the AVR. When I turn the volume up in the area of 10-13 and the source (usually DVD) gets to a particularly LOUD part, mostly action scenes...the receiver will sometimes simply shut off. To be honest it hasn't happened alot so I'm a little forgiving but I was watching Inception and I needed the volume loud because the center channel is a bit quiet. When the scene with the bunker explosions in the 3rd level dream hit, the receiver shut off. So, I have to pause the movie an turn the receiver back on which means the volume is reset to the default level. I haven't researched this issue yet and can only assume some sort of power overload protection is kicking in. I don't know why it would kick in at this level since it's not extremely loud. I will post more after I research it.
Big Red
3/5/11 UPDATE!
Ok, I opened a trouble ticket with Yamaha explaining the shutdown problem during high volumes. The response was that I likely had some strands of speaker wire crossing over and touching between positive and negative polarity. He said this would not show up during the speaker test and I need to check all speaker connections. However, when investigating, no speaker wires were touching but the problem was still happening around -12.0 during a loud action scene in "Unstoppable" when the train hits the horse trailer. One by one I disconnected the speakers and the problem only cleared with the front speakers disconnected. I verified the impedance was set correctly as well. Only after I lowered the levels of the front speakers below mid-point in the AVR setup menu was I able to stop the problem from occurring. The front's are plenty loud at -12.0 in comparison to the other speakers and the AVR is no longer shutting itself down during the loud spots. So, I'm happy.
Big Red
3/8/11 UPDATE!
Ok, I think my conclusions from 3/5/11 were a bit premature. A few days later I popped in "Predators" and the AVR turned itself off again in the opening scene when Adrian Brody was falling through the jungle canopy. Back to troubleshooting. This time it seemed to be the center speaker causing the problem, again no speaker wire touching. In the setup I adjusted the center speaker down and got it to stop. I THINK I've established a pattern. If the setup levels are above mid-point it seems to cause the auto shut down with high volume sections. I will go back to Yamaha on this to see if this is design intent or a bug.
Big Red

Click Here to see more reviews about: Yamaha HTR-5063BL 7.1 Channel 630 Watt AV Receiver (Each, Black)

Yamaha HTR-5063BL 7.1 Channel 630 Watt AV Receiver is a great value-priced receiver to help take your home theater experience further. It features the latest HDMI specifications (4 inputs/1 output) with Audio Return Channel and 3D-readiness (with firmware upgrade), 1080p HDMI compatiblity, and renowned Yamaha technologies like SCENE, CINEMA DSP, an onscreen display, and YPAO Sound Optimization. Expand your options even further with optional docks (sold separately) to add your iPod, iPhone, or Bluetooth sources.

Buy NowGet 37% OFF

Click here for more information about Yamaha HTR-5063BL 7.1 Channel 630 Watt AV Receiver (Each, Black)

Read More...

Yamaha RX-V2700 - AV network receiver - 7.1 channel Review

Yamaha RX-V2700 - AV network receiver - 7.1 channel
Average Reviews:

(More customer reviews)
The RX-V2700 has more features than any receiver I know of in any category. The main features that distinguish it are:
* Play MP3s (off PC running the proper software)/Internet Radio
* High Power (140x7 - One channel driven into 8ohm from 20hz-20khz)
* Handles 7.1 multi-channel PCM over HDMI, helpful for Blu-ray and HDMI
* YPAO (Automatically adjusts levels, and bass management features; I believe it also has some basic equalization features)
* Three HDMI inputs (not a common feature of AVRs)
* Can pass 1080P
Cons:
* Remote control longer than usual; controlling network features a pain
* Clunky GUI for network capaibilities
I connected a number of component video sources and audio sources and ran a single HDMI cable to my display. I have no video issues with this setup. I used YPAO to do the initial setup. When that was done I set all speakers to small and the LFE/Bass crossover to 80hz. There's no good reason to let your speakers handle bass if your subwoofer can do it. 80hz is what THX has reccommended. Everything worked fine. The diagrams in the manual of the back panel were hard for me to read. This made it harder for me to try to wire it up with less than two feet between it, and the back wall. There are some photos online of the back panel that might be easier to use.Sound quality is good. If you already had a good receiver, don't expect amazing improvements. Amps tend to sound very much alike. Processing modes are typical. Select straight mode, and it should do the right thing most of the time. I prefer 7-channel stereo for normal music listening, though.
As for video, because I have a plasma, and I feel it does a good job deinterlacing (480i -> 480p) and scaling (to it's native 1024x780,) I only use HDMI conversion. I did play around with the 2700's deinterlacer and scaler options. I saw no improvement. I also see no degradation, which is what I expect. I use the 2700 to convert component to HDMI for a DVD player/Tivo box and my XBox 360.
The network features work ok. I see usual problems with disconnects, etc. To stream MP3's from your computer to the RX, you will need Microsoft Media Connect, or Windows Media Player 11 (which comes with Media Connect.) You don't need to run Win Media, Media Connect will run as a background process, which is nice. Setting it up was easy enough, but I have spent my life working with computers. You will need to go into Win Media Player or Media Connect and add the 2700 so you can share music to it. The ability to play internet radio is one I quite like. You can't add stations, and are limited to MP3 (I think.) The 2700 uses the vTuner database, which is extensive, and you can suggest stations to it. The GUI for the network capaibilities is painful. It's slow for one thing. It will stop displaying with no keypress in 5 seconds or so. However long it is, it's not always long enough forcing you to hit the display button on the remote again. Very dissapointing for a product with a suggested retail of $1700.
As mentioned above sound quality is good. It's powerful enough that I can turn it up as loud as I want without audible distress, and I can't say that about other receivers I have owned. Like most receivers, it's only rated with one channel driven, but don't let that concern you. If it's not loud enough for you, you either have a big room, inefficient speakers or a need to damage your hearing. As for it's sound quality being better than other receivers, I can't say that it is. Most receivers sound pretty close (in tests, even trained listeners have trouble picking out one amp vs. another.)
A brief note about Blu-ray and HD DVD. This receiver will handle 7.1 multi-channel PCM at 96khz/24bits. That allows you to take advantage of the lossless audio formats available on the new high def media formats, such as TrueHD. You will need to set your player to output multi-channel PCM over HDMI. Some people have reported diminished LFE (low frequency channel) when PCM was used rather than bitstream. I don't have room for a full discussion of this alleged issue. It is unconfirmed by any formal review, and some people have reported that LFE over HDMI/PCM works fine. This is only a potential issue if you want to hear the best quality from uncompressed audio on Blu-ray or HD DVD. You always have the option to let the player convert to DTS or Dolby Digital and send that via bitstream over HDMI (or S/PDIF.)
As for video quality, all I asked of it that was it converted component to HDMI, which it does with no obvious degradation.
Why would you spend over $1000 on a receiver? Probably for the feature set, and high power. Yamaha also has a reputation for quality. It's my fifth Yamaha receiver, so I am obviously a fan.

Click Here to see more reviews about: Yamaha RX-V2700 - AV network receiver - 7.1 channel



Buy Now

Click here for more information about Yamaha RX-V2700 - AV network receiver - 7.1 channel

Read More...

Yamaha HTR-6130BL 500 Watt 5.1-Channel Home Theater Receiver Review

Yamaha HTR-6130BL 500 Watt 5.1-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
First I confess. I am technically challenged--I have trouble working a cell phone. But the manual was VERY detailed, if somewhat overwhelming, and the connections were easy because of labels and diagrams. As mentioned, the HDMI connection only passes the audio through to the TV--will not route it to the surround sound speakers.
So I knew I needed a second audio connection for my dvd and cable inputs, but I still had trouble getting any sound from the speakers from my DVD player and had to call tech support. They explained that this unit was designed before HDMI and that the connections were added later as a pass-through for convenience. I wondered why they would have designed it that way to start with--turns out they didn't! But all is well that ends well.
Tech support was EXCELLENT. Although I had connected everything properly (digital coax audio cable for DVD), they walked me through the set up menu choices to get the sound working properly. They even helped me with the settings on my Sony blue ray player! Saving the setup via scene buttons will allow me to to recover the settings without remembering the details.
The first movie I watched, I thought I was in a theater!


Click Here to see more reviews about: Yamaha HTR-6130BL 500 Watt 5.1-Channel Home Theater Receiver

High-value receiver with an impressive array of features and technologies to enhance the audio/video experience, including HDMI switching with 1080p video pass-through, iPod and Bluetooth audio compatibility, CINEMA DSP, Compressed Music Enhancer, and four SCENE buttons.

Buy NowGet 13% OFF

Click here for more information about Yamaha HTR-6130BL 500 Watt 5.1-Channel Home Theater Receiver

Read More...

Yamaha HTR-5930SL 5.1-Channel Digital Home Theater Receiver, Silver Review

Yamaha HTR-5930SL 5.1-Channel Digital Home Theater Receiver, Silver
Average Reviews:

(More customer reviews)
I just installed my new receiver last night - in a breeze.
This replaces my high-end Yamaha RX-V890; I needed 2 optical audio inputs. I tested all the functions and I am totally impressed and satisfied with my purchase. What is most important, is to have good speakers. Great quality is no longer a luxury. A better surprise, this is a 2006 model. WOW!

Click Here to see more reviews about: Yamaha HTR-5930SL 5.1-Channel Digital Home Theater Receiver, Silver

Take the next step in home theater performance with the Yamaha HTR-5930 digital surround receiver, which boasts 5.1 channels (110 watts x 5) of amplification and a host of high-end features. The receiver is built around Yamaha's proprietary surround sound technology and a powerful 192 kHz/24-bit digital-to-analog converter that maximizes the signal quality, ensuring that everything from two-channel audio sources to 5.1-channel DVDs sound rich, immersive, and dynamic. Plus, the receiver's wide 10 Hz to 100 kHz frequency range helps digital audio sources like DVD-Audio and Super Audio CD reach their full potential.
Movie and music buffs will dig the HTR-5930's Digital Sound Processing (DSP), Yamaha's means of simulating the acoustics of a concert hall, movie theater, or rock concert hall in the comfort of your own home. The Cinema DSP's four programs includes Movie Dramatic, Movie Spacious, Game, and TV Sports, each of which creates an optimum sound field for a specific type of programming. The Music DSP modes, meanwhile, range from 2-Channel Stereo to Concert Hall to Roxy Theatre, the latter of which reproduces the dynamic music environment of one of L.A.'s legendary rock clubs. And, of course, the HTR-5930 handles standard processing for Dolby Digital, DTS, and Pro Logic II sources.
What really makes the HTR-5930 tick, however, are the extras, such as Silent Cinema, a Yamaha-exclusive technology that lets you enjoy multichannel music or movie sound through ordinary headphones, and a night listening mode that lowers the volume during loud passages so the kids don't jolt awake after hearing explosions and other special effects from the next room. Plus, the HTR-5930 not only comes with a standard AM/FM tuner, but is also XM satellite radio ready. All you need is a separately sold XM antenna and a subscription to XM satellite radio and you're set.
Additional features include a virtual surround sound mode, A or B speaker selection, a sleep timer, and a Set menu that lets you optimize the receiver to suit your individual home theater system.
With a bevy of digital and analog inputs, the HTR-5930 can accommodate several digital sources such as DVD players, CD players, video game consoles, digital satellite systems, and much more. The rear panel options include two optical digital inputs and one coaxial digital input; three HDTV-compatible component video inputs and one output; four composite video inputs and two outputs; and two analog audio inputs and one output. Also present is a 5.1 multichannel input.
The HTR-5930 measures 17.12 by 5.94 by 12.44 inches (W x H x D) and is backed by a two-year warranty.
What's in the Box HTR-5930 receiver, remote control, two AA batteries, AM loop antenna, indoor FM antenna, user's manual.

Buy Now

Click here for more information about Yamaha HTR-5930SL 5.1-Channel Digital Home Theater Receiver, Silver

Read More...

Yamaha RX-V567BL 7.1 Channel Home Theater Receiver (Each, Black) Review

Yamaha RX-V567BL 7.1 Channel Home Theater Receiver (Each, Black)
Average Reviews:

(More customer reviews)
When my old TV died I replaced it with a new HD LCD. One of the things that bothered me was audio sync with the picture. I started checking into the problem and found that the sound being sent to my faithful old Technics receiver was being decoded faster than the video sent to the TV was. After some research and listening at local retailers I decided on the Yamaha RX-V567.
Here is why:
-HDMI 1.3 compatible. Syncs audio and video for high definition sources.
-Passive HDMI switching. Switches sources even when the receiver is off.
-Scene settings. Allows you to set an input, sound field program, initial volume level, etc for each of 4 scene buttons.
-YPAO. Makes setup of speaker levels a snap. Not so great for setting equalizer settings though - but that's just an opinion.
-Sound delay. Up to 320 ms sound delay that can be set manually.
-Direct Sound Processing Mode. Shuts off all unused portions of the receiver and processes surround stream using only the DAC and amplifier.
-Customizable Input labels. Set a custom label for any input.
-Tons of customizable options from setting speaker impedance, to allowing the use of multiple remotes, to an 8 band parametric equalizer that can be set differently for each input. As a matter of fact there are so many options that after a month of owning the receiver I don't think I have seen them all. Don't feel intimidated by this though, the receiver is configured so you won't need to mess with a whole lot of this stuff if you don't want to.
-Yamaha amplifiers. Awesome sound and plenty of volume.
-DAC processes a ton of digital standards up to and including Dolby TrueHD and DTS-HD and switches automatically or can be set for each source.
Things I didn't like:
-The only thing I didn't like was the fact the manual came on CD.
-The remote has lots of smallish buttons and no back light. A bit disappointing as it is expected to be used as a universal remote.
Also Available:
-Optional IPod dock and Bluetooth receiver. These are available but I myself don't own either. I have a Logitech Squeezebox for playing digital music as I don't care for compressed music sources.
-Sound Field processing. Again something I don't use but its there.
I am very pleased with the receiver so far. It has surpassed my expectations in many ways not the least of which is the ability to customize just about everything about every input on the thing. Sound quality is excellent and setup is quick and simple - it took longer to straiten out the YPAO cable than it did to set it up, and the sound field setup is excellent.
This is the first Yamaha electronics device I have ever owned and I am very impressed with it so far.


Click Here to see more reviews about: Yamaha RX-V567BL 7.1 Channel Home Theater Receiver (Each, Black)

The Yamaha RX-V567BL 7.1 Channel AV Receiver is a powerful receiver to help take your home theater experience to the next level. It features the latest HDMI specifications (4 inputs/1 output) with Audio Return Channel and 3D-readiness (with firmware upgrade), 1080p HDMI compatibility, an onscreen display, and renowned Yamaha technologies like SCENE and CINEMA DSP. Expand your options even further with optional docks (sold separately) to add your iPod, iPhone, or Bluetooth sources.

Buy NowGet 48% OFF

Click here for more information about Yamaha RX-V567BL 7.1 Channel Home Theater Receiver (Each, Black)

Read More...

Yamaha RX-V663BL 665 Watt 7.1-Channel Home Theater Receiver Review

Yamaha RX-V663BL 665 Watt 7.1-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
Before you go out and buy a fancy $1k+ AV receiver with all the bells and whistles, please ask yourself, do you really need all the extra little features like HD-radio, network connectivity, USB ports, a bazillion HDMI ports, fancy video processor, etc? If all you want is a basic receiver that will allow you to enjoy the latest lossless 5.1 or 7.1 audio codec from blu-ray movies (Dolby TrueHD, DTS-HD Master), or even just multi-channel PCM tracks from movies or the latest generation game console, without having to pay for all the other extra stuff, look no further!
Yamaha did us all a favor with this unit. It does everything most people will ever need (unless you're the most technology-hungry of audiophiles) and does it all remarkably well. Sure, it is not the prettiest looking AVR out there and the OSD (on-screen display) will look like you just found that old Atari 2600 from childhood and plugged it in to your big 1080p plasma. The text and menu system looks prehistoric! Presentation and esthetics are definitely not this receiver's forte. But rest assured that in designing this receiver, Yamaha has skimped on such aspects only so they could splurge on components that count! Burr-Brown DACs and other high quality bits and pieces normally found on receivers that cost many times more are utilized in this budget AVR to deliver outstanding sound. Yamaha spent the money on things that count: the sweet sounds of music or the immersive 7.1 channels of your favorite movies delivered to your ears with uncompromising sonic quality. I also have the much pricier Onkyo NR905 and Denon 4308 that I use in my main home theater and living rooms respectively and this little Yamaha RX-V663 that costs a small fraction of those units rivals their sound. I originally picked this up so I could also have a home theater experience in the bedroom but have been floored at how it performs so much so that I will likely find myself watching more movies in bed.
It does have its limitations though. For one, it is probably not suitable for a very large room unless you use a separate multi-channel amplifier. Don't get me wrong, 95 watts per channels is probably suitable for many, but rooms upwards of 300+ square feet might be a stretch. Secondly, it only has 2 HDMI inputs (not a big deal for many, and is actually ideal for most who just have a PS3 or Xbox connected in addition to a Cable or Satellite box). Even if you needed more HD capable inputs, there are some component inputs that can still be transcoded to HDMI so you still retain the luxury of having a single HDMI cable going to the TV and use the receiver as a true AV hub. Thirdly, it has a cheap feeling and looking remote that lacks enough buttons to control other component functions (not a big deal if you use a Harmony). Lastly, it doesn't upconvert all video sources to full 1080p (again, not a big deal since most TVs do a better job at video scaling anyway). The only 1080p upconverting AVRs that are worth using for their upconverting/video-processing abilities are those with the HQV Reon or Realta chip like the higher end Onkyos and the $5000 Denon 5308. That all said, you really do get a hell of a lot in the box with this $500 Yamaha.
In conclusion, everything listed on the features list on Amazon's page about this receiver works as advertised. The YPAO automated sound optimization/calibration works flawlessly and in some ways even better than the Audyssey system used by Denon & Onkyo. Lossless audio decoding of DTS-HD Master and TrueHD works perfectly and even HDMI switching operates quick and smoothly unlike the long pauses and sometimes buggy HDMI handshaking issues Onkyos has with earlier firmware. I can confirm that there are no LFE flaws, DTS-HD Master issues, or other major problems that have often been discussed about the first batch of next generation "future-proof" receivers. It even has nice extras like a 12v trigger, and second subwoofer pre-out, speaker posts to accept banana plugs, and all the other ins and outs that you don't normally find on receiver under $500 are present. And of course I've already raved about the sound. This is the best bang for the buck in terms of AV receivers and the only thing that may be comparable is the upcoming Pioneer VSX-1018 or Sony DG-920 which will arrive summer of 2008. But based on my previous experience with the DG-910, they are definitely a step down from Sony's ES line and will probably not sound as good as the Yamaha but will have a nicer looking OSD.
I will give this product 5 stars simply because you get so much for so little. Sound quality being of higher priority than esthetics.

Click Here to see more reviews about: Yamaha RX-V663BL 665 Watt 7.1-Channel Home Theater Receiver

Yamaha's RX-V663BL high-performance home theater receiver features full support for HD audio formats, HDMI video upconversion and deinterlacing, iPod and Bluetooth audio compatibility, improved YPAO for sound optimization and speaker setup in any room.4 SCENE buttons make operating the receiver easier than ever when switching between audio sources. 2 volume-setting functions are included on this receiver for additional convenience. Initial volume setting allows you to set the volume level that will be heard each time the power is turned on. Maximum volume setting prevents unexpected loud sounds. You have a choice of 8 unique CINEMA DSP surround programs to bring out the full audio potential of your entertainment sources. The RX-V563BL receiver is capable of delivering large amounts of reserve power for accurate reproduction of high-energy peaks that are especially prevalent in digital audio sources. It is XM ready with XM HD surround sound powered by Neural Surround, and is also SIRIUS satellite radio ready. Other features include improved YPAO for automatic speaker setup, iPod compatibility via optional dock, Bluetooth A2DP compatibility with optional YBA-10 wireless audio receiver, 1080p-compatible HDMI (2 inputs, 1 output), analog video to HDMI digital video with upconversion and deinterlacing, CINEMA DSP and adaptive DSP level for accurate surround sound reproduction, an improved compressed music enhancer for compressed music files, adaptive DRC (Dynamic Range Control), 40-station preset tuning / Auto preset tuning, and a preset remote unit.

Buy NowGet 31% OFF

Click here for more information about Yamaha RX-V663BL 665 Watt 7.1-Channel Home Theater Receiver

Read More...

Yamaha RX-V565BL 630 Watt 7-Channel Home Theater Receiver Review

Yamaha RX-V565BL 630 Watt 7-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
There are two model numbers for this AV Receiver as disclosed on CNET. One model number is the RX-V565BL, the other is the HTR-6250BL, which I purchased. At various times, the prices of the two vary on Amazon, so I just went with the cheaper one. I coupled the receiver with the Energy Take Classic 5.1 and was able to get two satellites on Ebay to complete a 7.1 speaker system. To round out the system I have the Mitsubishi DLP 73". I also have the PS3, xbox360 and Wii hooked up.
Unlike another reviewer who had a problem with his Tivo Series 3 with RX-V565 version of the receiver, I had no problem at all. If you have a problem with the HDMI, just use the Tivo component out and digital optical out direct into the Yamaha. It works perfectly.
The biggest problem I had in hook up was my inability to connect the Wii directly through the Yamaha. I use the component video cable for the Wii. This Wii cable has two rca connectors for audio.
There are two composite inputs on the Yamaha. One has a coaxial audio and the other has digital optical audio. There is no connection for composite video plus two rca female audio inputs. I ended up connecting the Wii output video straight to the tv, without the benefit of the 1080p upscaling of the Yamaha, and the audio only to the receiver. Because of this I can only give the receiver 4 stars.
The sound from the system is very clear. I am still playing with all of its sound options and will update the review after I have more experience with the sound options.
UPDATE I found this inexpensive work around for the Wii audio hookup on Amazon: RCA DT2AD 2-Way Signal Converter DT2AD. It allows conversion of the analog audio to digital audio.

Click Here to see more reviews about: Yamaha RX-V565BL 630 Watt 7-Channel Home Theater Receiver

Yamaha RX-V565BL 630 Watt 7-Channel Home Theater Receiver

Buy Now

Click here for more information about Yamaha RX-V565BL 630 Watt 7-Channel Home Theater Receiver

Read More...

Yamaha RX-V465BL 525 Watt 5-Channel Home Theater Receiver Review

Yamaha RX-V465BL 525 Watt 5-Channel Home Theater Receiver
Average Reviews:

(More customer reviews)
I've had the RX-v465 for over a month now, so i've had plenty of time to get comfortable with the receiver. I purchased this b/c it seemed like the best value. My major goals were to find a receiver that had HDMI vid and audio pass-thru and had good quality cd music output - and the rx-v465 delivered!
PROS:
I used the mic to auto-calibrate the sound quality - very easy (do this before using it). CDs (analog) sound great and digital audio sounds even better. The sound settings are great: it has several sound enhancer settings for a full/modern sound and even a 'direct' mode where the receiver uses the minimum electronics to provide a pure (almost vinyl) sound. These settings are easy to access once you get comfortable with the remote.
It has plenty of inputs for all of your older (rca) and newer (HDMI) devices. For TV, I run my comcast dvr box via an hdmi cable to the receiver, then run an hdmi from the receiver to the tv. For dvd, i run hdmi to the receiver. Only one cable (an hdmi) is needed from the receiver to the TV (sony bravia 52v5100). Video quality and dolby digital audio quality is excellent. It even allows you to view TV without turning on the receiver (downside in this mode is you can't listen to the sound system). Also, my cable remote can control the receiver volume when watching tv when the pass-thru mode is set (control-on).
CONS:
1. There is an annoying time delay (up to 3 seconds) when switching from HD to non-HD channels and when pulling up the dvr menu/list and cable guide. The receiver is thinking /switching digital modes and makes clicking sounds as it switches resulting in sound but no vid. This issue took me some time to get used to and will be a deal-breaker for most people.
2. Longer delay / thinking when the receiver is turned on and the hdmi input is set. Same clicking and no vid as it finds the right mode for the data that is coming in.
3. Remote is annoying, not built well, but whatever, its not a deal breaker.
OVERALL, i'm happy with this receiver at the price i paid when compared to other available receivers with similar features/functions.


Click Here to see more reviews about: Yamaha RX-V465BL 525 Watt 5-Channel Home Theater Receiver

Yamaha RX-V465BL 525 Watt 5-Channel Home Theater Receiver

Buy Now

Click here for more information about Yamaha RX-V465BL 525 Watt 5-Channel Home Theater Receiver

Read More...

Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black) Review

Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black)
Average Reviews:

(More customer reviews)
I am an A/V novice, and this is how/why I bought this receiver:
I originally bought it while looking for a 6.1 receiver in the $400.00 range. Best B** had a Pioneer that was THX certified for about $475. I had them put a rain check on it, then went to another store to listen to what they had (Best B** has a new policy of 'upselling' by sending any customer who is interested in mid-level audio to a 'specialist' who wants to unload Denon etc. - usually in the Home Theatre room. This annoyed me mightily, as I didn't even get a chance to listen to the Pioneer.)
At the other store, I listened to the 6.1 Yamaha HTR-5850 and was happy with that. My wife pointed out that the 7.1 RX-V659 was only about $50.00 more, and wondered what the difference was. We gave it a listen and were pleased. My wife listened to a Luther Vandross CD, and I listened to a classical music CD, then we popped in a copy of The Matrix DVD (you know what scene). My main concerns were HDTV compatability (has 3 component video inputs) and the RX-V659's audio/video auto upgrade feature. As neither me nor my wife have an iPod, we didn't care about the docking station capability of it, but it is a pleasant upgrade for later. We bought it for quite a bit less than what is listed on the Yamaha website, and less than the Pioneer receiver at BB.
I hooked the receiver to a Bic America Venturi bookshelf pair as front ends, then went with the Yamaha NS-SP1600 5.1 HTIB set-up (yes, it's their low end model, but I listened to them and they sounded fine for our 20'x30' room with nine foot ceiling.) I replaced that Yamaha HTIB center speaker with a KLH 525 II Platinum-II 125-Watt center speaker. I bought a roll of 12 gauge speaker wire - avoided the Monster stuff - went with Lowe's. The CD's and movies sounded great already, but there's more to this: the front speakers still have to 'break in' and only recently did I discover what the Neural Surround Sound exhibits when pumping XM satellite radio through them. WOW! Incredible separation! Our little room now has an audio sweet spot that allows me to consider never going out to the movies again. I've spent hours going through the different sound fields, and continue to come back to Neural Surround. Also , listening with headphones is wonderful with the Night Listening Enhancer - listening to TV with headphones never sounded this good for me. Set-up was breeze - the YPA sound optimizing thing takes some getting used to, but I like that the menus are on your TV's screen, not the face on the receiver unit.
Now I 'have' to get a new DVD/CD player that has DTS output. If this receiver lasts for at least a decade, Yamaha has a fan for life...
Unfortunately, this receiver is not HDMI-ready, but that might not be a gripe if/when I get a new HDTV and can run the video line directly into the TV instead of the receiver. Otherwise, this is a 5 star review.

Click Here to see more reviews about: Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black)



Buy Now

Click here for more information about Yamaha RX-V659BL 7.1 Channel Digital Home Theater Receiver (Black)

Read More...