Onkyo M-282 2-Channel Power Amplifier Review

Average Reviews:

(More customer reviews)I bought this amp to drive a passive homemade sub and it has done nothing but please me. I'm running it at 4ohms to each channel, and it pumps out serious power. Despite the lower resistance, its heat dissipation is lower than my receiver. I do not believe Onkyo's numbers for this amp, they have to be higher. When I hooked it up to my main front speakers, it revealed an exellent range of frequencies at any volume. This piece is a great example of Onkyo quality for a low price, I'm still curious as to why they discontinued it.

Click Here to see more reviews about: Onkyo M-282 2-Channel Power Amplifier

Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.What's in the Box Power amplifier, an AC power cord, and a user's manual.

Click here for more information about Onkyo M-282 2-Channel Power Amplifier

Read More...

Sony MHCEC98Pi Mini Hi-Fi Shelf System with Digital Media Port and 530-Watts RMS (Silver) Review

Average Reviews:

(More customer reviews)I did not purchase this from Amazon, but I wanted to write a review anyway. I have been looking everywhere for a stereo system that has clear sound, great bass, an iPod hookup and cd changer. If it had a cassette deck, that would be even better, but I could deal without one. I really liked the idea of an extra subwoofer. I wasn't going to purchase this system because it only has a 1 disc tray for cd's, but I figured that's where the iPod comes in for continuous music, and I should at least try it. Needless to say, I bought this stereo and hooked it up immediately (set up was a piece of cake).
I was immediately disappointed when the wires for my speakers were extremely short. Maybe only about 3 1/2 feet long. I like to spread out my system a little so I can get the best sound. Now, I'm not talking about placing speakers all around the room - they wouldn't even extend to the edges of my entertainment center.
The worst part of all, and the main reason why I am returning this system, is the sound is muffled. Even when I changed the preset EQ settings, the only one I was somewhat happy with was the "MP3 SURROUND"... but it still muffled my music. I could barely hear "s" sounds in the vocals... when I could, they sounded more like an "f". I should say, I am also very picky when it comes to electronics, but when I'm spending $200 + dollars, I think it's allowed! All I am asking for is crisp sound.
So, here are my pros to the system:
--Very nice looking stereo system
--DSGX feature really boosts the sound, along with the subwoofer
--LOVE the included iPod dock, which also charges
--7 different EQ settings for sound (my old stereo had 4)
--530 watts for loud sound
My cons, which severely outweigh the pros for me:
--Muffled sound. Vocals and music bits are not clear at ALL
--1 CD playing capability
--Wires and chords aren't long enough to spread out components to my liking
--Expensive for the things it is lacking
Hopefully this review will be helpful - I wish I had one that was this detailed when I was looking. Mind you, everyone has their own taste.
I would not recommend this system to anyone who is looking for crisp, clear sound. But if you like a nice strong bass and a lot of power... you may want to take a look.

Click Here to see more reviews about: Sony MHCEC98Pi Mini Hi-Fi Shelf System with Digital Media Port and 530-Watts RMS (Silver)

Click here for more information about Sony MHCEC98Pi Mini Hi-Fi Shelf System with Digital Media Port and 530-Watts RMS (Silver)

Read More...

Yamaha RX-397 100 Watt Natural Sound AM/FM Stereo Receiver Review

Average Reviews:

(More customer reviews)Despite the current fad for multi-channel audio/video receivers, the majority of people still listen to music with two speakers and only need a two-channel stereo receiver to drive them. As fanatic audiophiles with excellent stereo speakers, my wife and I recently purchased this receiver because of very good previous experience with Yamaha electronics products. This is a superb receiver in all respects. Some people may think that they need more than this receiver's rated power of 50 watts per channel, but Yamaha's power ratings are extremely conservative and this receiver will drive virtually any speakers to deafening levels (which I don't recommend doing). More important than it's ample power is its very low distortion. Yamaha specializes in low distortion products for very clean sound. In addition to robust power and ultra-low distortion the RX-397 has a full complement of controls, plus an easy to use remote. But as a fanatic audiophile another feature, typical of Yamaha, which I particularly appreciate is a button which sends the signal from our CD player (or any other non-phono cartridge input) directly to the amplifier -- bypassing the preamp circuitry, which is not needed except when playing LPs (which most people rarely do these days) -- for the lowest distortion and best signal to noise ratio. There are plenty of slighty less expensive -- and less good -- stereo receivers available, but if you want suberb performance at a moderate price I highly recommend this Yamaha.

Click Here to see more reviews about: Yamaha RX-397 100 Watt Natural Sound AM/FM Stereo Receiver

Click here for more information about Yamaha RX-397 100 Watt Natural Sound AM/FM Stereo Receiver

Read More...

Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver Review

Average Reviews:

(More customer reviews)This Sherwood (noted brand years ago, now mysterious) might be a decent bargain for twice the money. It's stripped down by present standards -- two channels only, no phonograph input. It's dead quiet and extremely clean sounding. I can't hear any emphases or dead spots in the frequencies. The tuner is exceptionally good; I am surprised at the success I'm having with it in a poor reception area, with only the antennas that are supplied. Appearance and quality are fine: nice black steel case, solid buttons, one big old volume knob. It was all I needed, so I'm very pleased. Going to get another for a computer amp.

Click Here to see more reviews about: Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver

Sherwood's incredibly affordable RX-4105 offers integrated preamplification and amplification, inputs for numerous audio source components, and advanced radio tuning and station access. The receiver delivers 100 watts RMS per channel x 2 for strong, clear sound across the audible spectrum--even at low listening levels. The company has lowered the amplifier's distortion relative to the previous model (the RX-4105), to less than 0.08 percent, while also giving the receiver a new layout borrowed from its higher-end components.The RX-4105 uses totally discrete amplifiers for all channels (TDAS) to maintain its high power and low distortion. Use the receiver's A and B clip-type speaker outputs to power 2 different rooms, or to biwire a pair of speakers for more efficient amplification (with A outputs driving the woofers, for instance, and the B outputs driving the tweeters--make sure your speakers are compatible if this is a key feature for you).The receiver also offers a handy 25-key remote control and switching for 2 pair of loudspeakers. Audio inputs switch between and amplify up to 4 additional components, including 2 requiring both inputs and outputs (such as a cassette deck and a VCR). The built-in AM/FM tuner features 30 station presets and auto station setup.Other features include bass and treble tone controls, a dimmable fluorescent display, and a .25-inch headphone jack for private listening.What's in the Box Sherwood RX-4105 receiver, remote control, AC power supply cord, FM indoor antenna, AM loop antenna set, and owner's manual.

Get 37% OFF

Click here for more information about Sherwood RX-4105 2-Channel 100-Watt Stereo Receiver

Read More...

Yamaha HTR-5550 Audio/Video Receiver Review

Average Reviews:

(More customer reviews).... I too have had problems with my Sony receivers, Sony makes great TVs, computers, etc., but stay away from their non-ES audio products.
The HTR-5550 has a high current amplifier (high current amplifiers will play louder and sound better than non high current amplifiers of the same or higher power rating). The quality of the product is excellent, no loose knobs, cheep buttons, etc. Yamaha's DSP processors are second to none.
Component video switching works well and has enough bandwidth for HDTV signals. The remote is logical, as is the receiver for the most part except for the radio presets, it's a little tedious to use, but at least it can scan and automatically program in radio stations. It also has assignable inputs.
The sound quality is outstanding, good definition, no signal clipping.
There is a lot more to it, but it is really best to just try it. Reviews help, but you need to actually use it to fully understand the overall quality of the product. I compared to Marantz, Harman/Kardon, Onkyo, Denon, and you definitely get more for less with the Yamaha. If you are in the market for a receiver in this price range, I highly recommend the HTR-5550. Also if you are looking at the $200-300 receivers, trust me it is much better to spend more to get this. I have tried the cheep receivers and you get what you pay for.

Click Here to see more reviews about: Yamaha HTR-5550 Audio/Video Receiver

Click here for more information about Yamaha HTR-5550 Audio/Video Receiver

Read More...

Yamaha RX-797 Audio/Video Receiver Review

Average Reviews:

(More customer reviews)This is an excellent 2-channel Stereo Receiver, for several reasons. Let me explain why I chose this brand/model over others and how I came to it. If you are in the market for Stereo Receiver, it may be useful for you.
A few months ago, I was listening to a jazz CD on my cheap ($200) Sony Home-Theater-In-A-Box and noticed that the sound was noticeably tighter than when I listened to it on my much more expensive, but significantly older stereo system. My old stereo system was purchased as separate components in 1993. It consisted of Sony STR-D990 Receiver ($400), single-disc Sony CDP-211 CD player ($100) and pair of Advent Baby II speakers ($250). Mind you, each of these components work and sound as good today as they did 15 years ago at the time of purchase (kudos to Sony for that), but I suppose I'm getting a little pickier now that I'm in my 30s. Music plays a MUCH larger role in my life than movies or television does (hence the cheap Home Theater set-up), so I decided I needed to upgrade.
PRIORITIES: 1) SPEAKERS--> 2) RECEIVER--> 3) CD PLAYER --> 4) CABLING/INTERCONNECTS
I decided that speakers were most important and thus the place to begin. After reading several reviews, I decided that Polk Audio Rti6s might be a good choice. I went to a retail store to listen to them and they sounded really good, but then the sales associate let me listen to the Polk Audio Lsi9s. Whew! They just blew me away. I had never heard anything like them. While the Rti6s run for $270, the Lsi9s are $900, but well worth it for that price, as a long-term investment (Polks come with a 5-year warranty). But I noticed that these run at 4 ohms and need a low-impedance amplifier/receiver, that is, one equipped with so-called "high current amplification," to drive them. Well, my old Sony did not have this function (it could take only 8-0hm current speakers). So, I looked all around for a receiver that could fit the bill and the Yamaha RX line became the obvious choice, after reading positive review after positive review. Since the Lsi9s can handle 200 watts per channel, I chose the RX-797 because while it has a power rating of 100 watts per channel at 8 ohms, it allows one to use two 4-ohm speakers and when doing so there is a power boost. Customer representatives from various retailers couldn't give me an exact watt rating (because Yamaha does not conduct tests at with 4-ohm speakers), but the general concensus was that it would increase to about 140 watts per channel with 4-ohm speakers. (I just didn't want to shortchange my speakers). I also chose this receiver because of the extremely low Total Harmonic Distortion (THD) rating of .019% as well as the Pure Direct and CD Direct modes for the lowest possible distortion. (Compare these features to say Onxyo and Harmon Kardon A/V receivers in this range and you'll see that the advantage lay with Yamaha).
When the RX-797 arrived, it not only lived up to but exceeded my expectations. Paired with the Lsi9s, I can hear a much, much crisper separation of instruments, and this is especially nice for my digitally remastered jazz CDs. I live in an apartment complex now and never have the need to turn the volume beyond the 9 o'clock position. I have gone up to 11 o'clock for testing (when I knew my neighbors weren't in!) and, as expected with these ratings, I couldn't hear any distortion whatsoever. (I can't wait until I move into a house for a larger sound stage). Other pluses: The knobs and controls have a nice solid feel and look great. It picks up many more FM radio stations than my old receiver, and the reception is noticeably cleaner. The remote is simple and sensible (just how a remote should be). My only gripe is that one cannot program CD players made by other manufacturers with this remote, but perhaps thats standard practice. This has other nice features such as being XM Satellite Radio Ready and dual room/dual source for those who are interested, but the main selling points for me were the 4-ohm capability, the wattage rating and the extremely low distortion. The fine looks and sensible controls/display and remote are icing on the cake.
I found one from an authorized dealer by a fluke for $350, but certainly would have been willing to pay the full $499. If you see one for less than $450, be sure to first confirm with the seller (or better yet Yamaha) that they are indeed an authorized dealer; otherwise your two-year warranty won't be honored if you run into problems (not that I'm expecting to).
In sum, if you are looking for a receiver with ample, clean power, extremely low distortion, the abilitiy to drive 4-, 6- or 8-ohm loads, excellent FM reception, and easy to use and well laid-out functions for 2 channel (as opposed to Home Theater) listening, I don't believe you can do better for under $600 than Yamaha's RX-797 receiver.

Click Here to see more reviews about: Yamaha RX-797 Audio/Video Receiver

Get 9% OFF

Click here for more information about Yamaha RX-797 Audio/Video Receiver

Read More...

RCA RS2767I AUDIO SHELF SYSTEM Review

Average Reviews:

(More customer reviews)This is well worth what i got
-The Bass is really good.
-Ipod Dock is great and charged my ipod in a hour.
-The Sound Quality is awesome. I put it in my room i cant go pass 7 or my mom and dad can hear....Especially The Bass.
-The remote is easy to use once you figure everything out(just have to buy AAA battery's.


Click Here to see more reviews about: RCA RS2767I AUDIO SHELF SYSTEM

Click here for more information about RCA RS2767I AUDIO SHELF SYSTEM

Read More...

JVC Deck with Built-In HD Radio Tuner Review

Average Reviews:

(More customer reviews)I went shopping around and compared the JVC to the Kenwood and the Alpine radios with builtin hd tuners. The Kenwood radios biggest problem is you have to activate the satellite radio to use the radio. The Alpine radio was the cost. For the money the JVC KD-HDR1 provides all the features and versatility to make it the best radio for the price and for the capabilities it offers. Once you listen to High Definition radio you will not enjoy regular FM broadcasts again. Alot of stations are going to High Definition radio. I am very happy with this product and would recommend it to anyone who wants a good sounding radio without paying for satellite to get it. The surround sound it offers is even a better enticement and the EQ settings will make it worthwile even on a stock system without a amplifier.

Click Here to see more reviews about: JVC Deck with Built-In HD Radio Tuner

Click here for more information about JVC Deck with Built-In HD Radio Tuner

Read More...

Sony RK-G138 Audio Connecting Cable for Headphone Extension (3 meters) Review

Average Reviews:

(More customer reviews)I had previously owned a different brand of headphone/speaker extension cable for my computer speaker system and it worked well for about 6 months. After that, the female connector started getting loose, and I would only hear sound coming out of the left channel unless I wiggled the connector around to 'fix' the problem. I would have to repeat this process almost every day, and it started to annoy me to no end.
Alas, I came across this Sony brand extension cable, and I thought I'd give it shot.
I was pleasantly surprised when I heard a 'click' noise when I connected my speakers to the extension cord, a very snug fit. It gave me the sense of ease I was looking for - I knew that I didn't have to worry about a bad connection again.
So far, I've noticed better sound quality coming out of my speakers than before (most likely due to the fact my older extension cable was junk), and I have yet to worry about a bad connection/poor sound quality. It feels good to have my speaker system sounding right again.
BOTTOM LINE - great solution for extending the distance for your headphones or computer speaker system! Gold plated connectors, 2.5mm to 6.3mm adapter, Sony-quality, 9.8', good stuff :)

Click Here to see more reviews about: Sony RK-G138 Audio Connecting Cable for Headphone Extension (3 meters)

Click here for more information about Sony RK-G138 Audio Connecting Cable for Headphone Extension (3 meters)

Read More...

AudioSource Amp 200 High-Current Stereo Amplifier (80 Watts x 2) Review

Average Reviews:

(More customer reviews)My first impression on unpacking the AMP200 was its weight for an amplifier of this size, 11 kgs (just over 24 pounds) !
The front panel is black brushed metal, and has three sets of push buttons on the left hand side (power on/off, speakers A on/off, and speakers B on/off). On the right hand side there are two controls, one for adjusting the left/right balance, and one for adjusting the volume trim (-12 dB/+6 dB). Each of these controls clicks into the center (unadjusted) position. In the center of the front panel is an indicator light which glows a bright blue when the amplifier is operational or red when the amplifier is in standby mode.
On the back of the amplifier are various connectors, switches, and small adjustment knobs, as well as the connector for the detachable power cord. The speaker binding posts accept either bare wire cable or banana plugs (not spades).
I would highly recommend reading the five page Owner's Manual before setting up the unit, as the controls on the back of the amplifier are not readily accessible once it has been installed into a rack !
For my purposes, I'm using a single stereo source into RCA inputs (when using only one signal source you need to use the Line 2 inputs rather than Line 1). The power mode of the unit is also configurable via a three position switch for either normal power operation using the front panel on/off button, to be remotely controlled by a DC trigger, or by means of automatically sensing the input signal. I opted for the latter, and the amplifier comes out of standby mode within a few seconds of sensing a signal and goes back into standby mode if no signal is received for approximately three and a half minutes.
At less than $ 250, I'd rate this as a nice quality amplifier with good sound.

Click Here to see more reviews about: AudioSource Amp 200 High-Current Stereo Amplifier (80 Watts x 2)

A terrific choice for a remarkably affordable system upgrade or building block, the AudioSource Amp 200 high-current stereo power amplifier offers 80 watts RMS per channel x 2 or, in bridged mono mode, up to 250 watts x 1 (into 8-ohm speakers in both cases). Now you can scale your listening to match your budget: use either 1 amplifier or 2 for stereo sound or 5 or more in concert for full-blown home-theater excitement--perfect for your DVDs, multichannel DTV broadcasts, or high-resolution audio formats like DVD-Audio and SACD.Keep in mind that this is an amplifier only, with no volume control or onboard surround processing (though it does offer independent adjustable output controls for each channel). It's designed for use with a stereo preamplifier or a surround receiver offering preamplifier outputs.Making the move from 5.1- to 6.1- or 7.1-channel surround sound? If your receiver has preamp outputs for all channels, there's no need to replace your 5.1 surround receiver. Just feed the additional center or surround signals to a strategically positioned Amp 200.Connections consist of a choice of RCA (line-level) or clip-type (speaker-level) inputs and banana-plug-friendly binding-post speaker terminals for outputs. There's also set of stereo (left/right) RCA passthrough jacks for use in a daisy-chain setup.The amp works with 12-volt power-on/-off circuitry and also features a signal-sensing circuit for automatic power-on/-off, making it as ideal for custom installers as for end users. Its A and B speaker outputs let you power speakers in your main room, a second room, or both rooms simultaneously. The amplifier's toroidal power supply keeps distortion extremely low (less than 0.04 percent).

Click here for more information about AudioSource Amp 200 High-Current Stereo Amplifier (80 Watts x 2)

Read More...

Sherwood RX4503 100 Watt RMS Dolby Virtual Surround Sound Receiver (Black) Review

Average Reviews:

(More customer reviews)These days, it's getting harder to find stereo only receivers. I needed one for my garage and parties.
I really did not want to buy a home theatre system with all the extra video ports that would never be used.
This receiver rocks! Lots of power, an MP3 jack in front, optional bluetooth adapter (which I'll never use).
The AM/FM reception is very good, I'm almost 30 miles from most transmitters.
The dial cranks up to 70 for power. It is crisp and clear up to about 64. Then a little bit of distortion
enters into the picture. That's pretty respectable. Even cranked up for hours it seems to run cool enough.
Great bang for the buck and highly recommended. Take advantage of the subwoofer out and add one to your system.
I paired it with two Sony SSF-5000 speakers, and the Sony SA-W3000 subwoofer. Turns out to be a good balanced system.
I can even listen to it a quarter mile away in my sweet corn field!

Click Here to see more reviews about: Sherwood RX4503 100 Watt RMS Dolby Virtual Surround Sound Receiver (Black)

Get 26% OFF

Click here for more information about Sherwood RX4503 100 Watt RMS Dolby Virtual Surround Sound Receiver (Black)

Read More...

Sony MHC-GX45 3-CD Shelf System with Game Sync (TM) Mixing Review

Average Reviews:

(More customer reviews)With a budget of $300, I shopped around for minisystems, listening to products from Panasonic, JVC, and Sony. Panasonic systems tend to have a muffled sound. I quickly ruled them out. The JVC GT88 has a slightly tinny sound, but the JVC Z10 is better and has excellent bass. However, this Sony really has the best overall sound. JVC just had good bass - the sound from above seemed to get lost. The Sony has the best quality sound and costs $100 less than the JVC. Music lovers, this is your system. Rap/Metal Listeners or anyone who just wants bass, go for the JVC GT88.
Additionally, out of all the systems I looked at, the Sonys have the best overall appearance. The rest are way too gaudy. This unit is simple yet attractive.
Sony MHC-GX45 - A great deal for $200.

Click Here to see more reviews about: Sony MHC-GX45 3-CD Shelf System with Game Sync (TM) Mixing

Click here for more information about Sony MHC-GX45 3-CD Shelf System with Game Sync (TM) Mixing

Read More...

Pioneer VSX-919AH-K 120 Watts A/V Receiver with Full Color GUI/OSD, Advanced MCACC and Analog to HDMI Up-Conversion (Black) Review

Average Reviews:

(More customer reviews)Pros: . THD: 0.05 %: SOUND QUALITY IS SIMPLY UNBELEIVABLE
. EASE OF SET UP. I HAD TO READ SOME THROUGH THE MANUAL, BUT THE OSD and GUI are so easy, really, a cave man can do it.
. multiple decoding modes.
. Nice Blue screen with big letters and numbers.
. Sturdy, Well constructed, appears durable.
. programmable remote.
. 2 zones AUDIO control.
. beuatiful clear lows, and distinct highs, appeases to the musical ears.
. easy to configure manually, the base, treble, and eq,..
. nice shiny black. dimmable light, sleep mode. PS: the remote lay out actually makes sense, unlike my yamaha 565 (see appropriate rview).
.3 hdmi, 2 opticals, one coax, multiple other inputs,. easy to rename and reassign.
. ability to control crossover for subwoofer and manually set up your system. also can use included microphone.
.My biggest plus remains the beuatiful pure sound coming from the ceiling speakers. it blows my yamaha vx 565 away....far away
Cons: the manual may be a bit confusing, but once you get a handle on what button is for what, u can consult the manual less frequently. it is intuitive. also the osd diplay makes the set up a breeze.
I can not actually think of any con. having owned the yamaha 565 and 361, and sherwood receivers, i can say this one delivers the best sound and has the best controls. the price is eggcellent,..thank you newegg.
Other Thoughts: I received the VSX-919AH-K & was very anxious to set it up. i have researched it extensively before placing my order, and it came down to choosing between this receiver and the Yamaha VSX565 which i already own, but was on a discounted price prom. Avoiding duplicity, I bought this receiver knowing it has only 3 hdmi inputs and ability to upgrade signal from component only to 1080p, but in the next 1-2 years all video component would be alrready in 1080p, so unless you are using old system it will not matter.
I am extremely satisfied with the sound from this receiver, much more then the one in my main room, the yamaha 565, and here is why
. 120 watts versus 90 watts, and pay attention: 0.05% THD versus only 0.9 % THD on the Yamaha. yes the wattage is not the only criteria, getting a pure sound is the bottom line.
. great sound experience, hooked up to a 5.1 configuration with OSD speakers, C640i series, 150 watt ( each) spearkers and 100 w sub.
. easy to operate, and set up


Click Here to see more reviews about: Pioneer VSX-919AH-K 120 Watts A/V Receiver with Full Color GUI/OSD, Advanced MCACC and Analog to HDMI Up-Conversion (Black)

VSX-9I9AH I20 Watts x 7 PHAT II @ 1 kHz Full Color GUI / OSD USB input for iPhone and iPod certified playback. Charging and Album art in 1st room. Advanced MCACC 9 Band EQ Symmetric EQ X-Curve PQLS 2 Channel Auto Level Control Multi-Channel Sound Retriever Multi- channel Neural THX / WMA-9 Pro Kuro Link Analog to HDMI Up-conversion PureCinema Video Processing 3D Noise Reduction 3D Y/C Separation Audio Inputs (4 in / 1out - includes Tuner) Digital Inputs (3 - 1 coax / 2 opt) Multi-Zone A/V Pre-out New Preset Remote Control

Click here for more information about Pioneer VSX-919AH-K 120 Watts A/V Receiver with Full Color GUI/OSD, Advanced MCACC and Analog to HDMI Up-Conversion (Black)

Read More...

TEAC AG-790A Stereo Receiver Review

Average Reviews:

(More customer reviews)I had a 7.1 channel Home Theater Receiver (HTR), but I got rid of it in favor of this stereo receiver. For me, the HTR was excessively complicated with too many menus to work through just to play music from my collection of LP's, cassette's, or CD's. The Teac AG-790A is simple to use for playing music. This receiver can control four speakers. The description of this product does not mention that if you want to control two sets of speakers (4 in total), they should be identical. There is no way to adjust for differences between two sets of speakers with different sound qualities or power ratings. TEAC's manual makes the same recommendation for identical speakers if you are going to use four speakers. The controls are very easy to use, although as one reviewer mentioned, I too would have preferred more dials instead of buttons. I know, "old school". Still, the buttons are very easy to use. I have a phonograph, cassette recorder/player, and CD recorder/player all attached to this receiver with a couple of Bose speakers. The radio tuner is great too. The sound of music this receiver produces is fabulous. However, for those times when I want to emphasize the bass sounds, I might add a powered sub-woofer as my "second set of speakers". There are bass and treble controls on this receiver, which work great. I am really talking about the sound quality of my speakers and not the receiver. I am talking about really pumping up the bass beyond what my speakers can provide. A sub-woofer with its own internal power system connected as the second set of speakers will allow me to adjust for the differences between the different speakers independent of this receiver. With the bass, treble adjustments available on this receiver, there really is no need for a powered sub-woofer, unless you are a bass freak as I am sometimes. That is just a personal choice. This receiver provides a lot of adjustment with its bass, treble and loudness controls. The bottom line is I highly recommend this receiver for music lovers.

Click Here to see more reviews about: TEAC AG-790A Stereo Receiver

Get 33% OFF

Click here for more information about TEAC AG-790A Stereo Receiver

Read More...

Pyle-Home PT600A - 300W Stereo Receiver/Amplifier Review

Average Reviews:

(More customer reviews)To judge the value and usefulness of my opinion, one must understand where I'm coming from. I needed an amplifier which was both affordable (I'm cheap that way!) and which would accommodate multiple devices. Specifically, I needed to connect and be able to select among a TEAC reel-to-reel tape deck, a Panasonic cassette tape deck, a Thorens turntable (yes, I still play vinyl), and a CD player. These beautiful antiques (well, all but the CD player) have been with me since the 1970s and I was in no way ready to give them up, but my National Panasonic quadraphonic receiver finally gave up its electronic ghost. It had been playing only stereo for years anyway, and no new media come in four-channel quadraphonic format, so a stereo amplifier was all I needed. Nor did I still use the radio tuner in my old receiver, so the absence of that was not a problem.
What did I give up (besides the third and fourth sound channels that no one uses any longer anyway)? The old receiver had a beautiful hardwood case; the new Pyle Pro amplifier has a fairly thin metal case. The old unit had beautifully chromed metal push buttons and knobs; the new one has black plastic ones. The old unit allowed me to adjust the volume on each output channel individually; the Pyle Pro does not. The old one had sliding controls to help achieve the best possible sound balance in a given room and with a given speaker configuration; the Pyle Pro does not. The old one had a "Loudness" button to enhance sound quality when played at very low levels; the Pyle Pro does not. The old one had a knob that could swap channels from one speaker to another (left to right, back to front, etc.); the Pyle Pro does not.
For use in a typical living room with a typical listener, however, few of the bells and whistles on the old National Panasonic receiver were ever used. The level of finesse that they were designed to achieve exceeds that of the non-audiophile, and I don't really miss them. The only adjustment that I wish the Pyle Pro had would be individual volume controls for each of the two stereo channels/speakers rather than just one master volume control. Otherwise, it has everything that an average home user of music could desire.
Oh, it does one rather strange thing: when changing the volume, the "on" lights dance around. Each of the five inputs has a button on the front for selecting which input the user wants (turntable, tape deck, CD player, etc.) A light appears above the selected button (and that, by the way, is the only indication that the unit is turned on; there is no master "on" light.) When the volume knob is turned, the lights above other, non-selected buttons turn on briefly. When the volume knob is no longer being turned, the light returns to burn steadily above the selected input button. This isn't really a problem, more of a curiosity.
My television set has perfectly adequate speakers of its own, and I have no need whatsoever to pipe it through the amplifier and the Bose speakers attached to it. No "home theater" here. Nor have I attached the Pyle Pro to my computer in any way. What I am attempting to show here is that I have a pretty simple, straightforward audio setup. If I want to play a record, I want to hear the sound come out of my speakers with good stereo separation, with no distortion, and with adequate volume. I want the same thing when I play a tape or a CD. Simple. The Pyle Pro PT-600A allows me to do all those things perfectly. The sound is, so far as my ears can discern, perfect. The volume is fully adjustable and has amplification to spare. The base and treble can be adjusted independently. I ask for nothing more, and the Pyle Pro delivers everything I ask for. The headphone receptacle works perfectly, too, and the speakers automatically fall silent when a headphone jack is plugged into it.
Other reviewers have commented on the tiny font and dark colors of the remote control unit. My only question is why anyone would want a remote control for an amplifier. I'm not accustomed to having one, and there are too many remote controls lying on the end table now, so any perceived shortfalls in the remote control are, to me, irrelevant. I suppose the bottom line is that if one is a rabid audiophile who loves stacking multiple components in metal trays and manipulating every conceivable adjustment to an amplifier, then the Pyle Pro PT-600A is probably not going to prove very satisfying. However, if one simply wants to listen to stereo recordings from up to five different devices all connected to a single amplifier, and if one is satisfied with simple push-button controls, and if one can accept the absence of individual right-and-left speaker volume adjustments, then I believe that the Pyle Pro PT-600A will provide a fully satisfactory listening experience. I miss the external appearance of my old National Panasonic quadraphonic receiver, but I love the performance of my new Pyle Pro, and if I must trade appearance for performance, I'll choose performance any day.


Click Here to see more reviews about: Pyle-Home PT600A - 300W Stereo Receiver/Amplifier

Get 65% OFF

Click here for more information about Pyle-Home PT600A - 300W Stereo Receiver/Amplifier

Read More...

Sony STR-DE135 Surround Receiver Review

Average Reviews:

(More customer reviews)If all you need is a great stereo receiver - and NO 5.1 or DOLBY surround - then this is the unit for you. Simple to install and operate. Very clean sound and plenty of power. One or two more inputs wounld't hurt, but overall you can't beat the deal on this receiver. I highly recommend it to anyone looking for a basic stereo receiver that has plenty of clean power. Great buy.
NOTE: This review is in my own words based on my own experiences with this product - unlike Chi Tran, whose ENTIRE REVIEW TEXT of this item was copied "cut and paste" from the Crutchfield website. What a joke.....

Click Here to see more reviews about: Sony STR-DE135 Surround Receiver

Click here for more information about Sony STR-DE135 Surround Receiver

Read More...

Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black) Review

Average Reviews:

(More customer reviews)I finally received my Pioneer 1019 last night. I ended up staying up way too late last night setting this up. I purchased the Pioneer 1019 after a lengthy decision process between the Denon 1910, Onkyo 607 and Yamaha 765. I needed 4 HDMI so the earlier models wouldn't work and I was also limited in footprint depth so it was these 4. I went with the Pio because I've always been a fan of the sound and quality and each of the others had one or two things wrong (Denon not available, Onkyo quality issues (?), Yammy no assignable inputs). My one concern with the Pio going in was the revamped amps and the decline in weight. Would it impact quality of sound and power? Based on my early tests, NO. This unit has a great, clean sound with lots of detail at low levels and high. I did not hear any hint of strain.
Design
While the unit is smaller and lighter than the 1018 it doesn't look `cheap' and it still has enough bulk to it to make you think it has power. It looks great in the rack. Remote is a bit confusing but I won't use that much after setup and the Harmony database had all the relevant codes, a nice surprise for such a recent release.
The Setup Process
It was pretty easy to get all of the speakers and components hooked up. The manual stinks but I had spent a fair amount of time with the manual online in advance and after a few reads you can fill in the blanks. It took me about an hour to get all of the old equipment out and the new equipment in. Assigning the inputs was relatively straightforward. Renaming inputs was awkward due to the way they handle text input but it was very flexible. I had a little trouble assigning the Optical audio signal from my Macbook along with an HDMI input. I first tried to assign the optical directly to an HDMI input but you can't do that. Instead I had to assign both the HDMI and Optical to an entirely different Input Name (I chose DVR). It worked fine but I suspect that means I really lost a video input since I can't send anything else to the original HDMI input. Not a huge deal as I don't use all the inputs but it was still annoying.
I haven't done MCACC yet but I did use the manual speaker setup and my speaker settings from my old Sony AVR and input those here. That was pretty easy and even with this rudimentary setup the sound was great. Even my wife (who is happy with TV speakers alone) commented on the improvement in quality.
I ran though some of the DSPs and effects but I prefer to set everything to DIRECT, especially on BDs but it was nice to use the Extended Stereo for my iPod and get sound from all of the speakers.
Video
I had lots of questions on the video scaler. I agree with most posters that you should not buy an AVR for this capability. Most TVs will do a better job than any $500 AVR. My TV is a 2006 model though and it has pretty average scaling so I wanted to see how it would look. I hooked up my Comcast DVR with both HDMI and with Component/Optical to gauge the difference. HDMI looks great (and no scaling, of course) but there was no impact on visual signal. I did not have any annoying audio lags either. Component also looks really good for HD signals. I could not tell the difference between the HDMI and Component signals on HD channels.
I then tried it on some SD channels with the scaler set to 1080p. The AVR did fine but it wasn't any better than my TV. No worse either but then I already mentioned my scaler is pretty average. So, as I said earlier, don't buy the unit for the scaler but it's not a negative either. Just try it for your sources and TV and it may or may not generate any improvement in PQ.
The good news is that it does a very good job of upconversion (switching analog signals to digital) which means you can have 6 HD sources (4 HDMI and 2 Component) which is nice.
The one odd thing I found was in the aspect ratio settings for 4:3 signals. The default is `Through' which would make me think it sends the signal untouched but it is actually for stretching the signal (and it does a bad job of that). I switched the signal to `Normal' and it then just passed the 4:3 signal untouched - a definite improvement.
All other sources looked great. Panny BD35 looks and sounds great and I was relieved to see that my Macbook was able to pass a clean signal through the AVR to the TV.
Audio
So the real question is about how this unit sounds. As I mentioned earlier, I am really pleased with the quality and balance. Everything sounds warm and detailed. I expect it to improve even further with the MCACC adjustments. I've listened to quite a few units over time and this has all of the Pioneer sound and quality you expect from them. I don't think anyone will be disappointed with the sound or the power (Of course, if you are willing to spend 3x the $$ then you can get better quality from the Elite series. If you have the cash, definitely buy one of those. If you are looking to spend

Click Here to see more reviews about: Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)

The VSX-1019AH-K represents the pinnacle of the Pioneer receiver line.This hub for your home entertainment center allows you to enjoy your favorite movies on Blu-ray disc, DVD or VHS on your flat-panel television like never before. With standard features that include a phenomenal ability to upscale and convert analog video signals to 1080p when transmitted through HDMI to your high definition television, the VSX-1019AH-Ks video scaler presents you with nothing but the best quality possible today regardless of what video source it receives.

Get 6% OFF

Click here for more information about Pioneer VSX-1019AH-K 7-Channel Home Theater Receiver (Black)

Read More...